TT Amp-Chassis
Predrilled Diecast Chassis / 1 1290 Size: 4.40" X 2.38" X 1.22" / 112 X 60 X 31 mm
Predrilled Diecast Chassis / 1 1290 Size: 4.40" X 2.38" X 1.22" / 112 X 60 X 31 mm Optimized for the use with the TT-Booster G-ForceOne and B-Force One
TT-Chassis Aluminium - Typ 001 Grösse / Size : 430 x 160 x 65 mm (Marshall Small Size) Material: 2 mm Aluminium
With cutout for Power-Jack
TT-Chassis Aluminium - Typ 002 Size : 645 x 173 x 65 mm (Plexi Size) Material: 2 mm Aluminium Without drills and cutouts
With universal side panels. The tabs can be used inside or outside the chassis (see illustrations for more details). All edges on the sides screwed. Extremely stable !
TT-Chassis Aluminium - Typ 003 Size : 590 x 190 x 64 mm Material: 2 mm Aluminium
Note: aluminum casing might have production-related marks on the surface caused by the sheet metal bender. The use of a front and rear is recommended, if this should bother.
TT-Chassis Aluminium - Typ 004 Grösse / Size : 484 x 203 x 63,5 mm Material: 2 mm Aluminium Ohne Bohrungen und Fräsungen / Without drills and cutouts
Aluminium Chassis Grösse / Size: 365 x 160 x 65 2 mm Aluminium
Aluminium Chassis Grösse / Size: 365 x 160 x 80 2 mm Aluminium
Aluminium Chassis 2 mm Aluminium predrilled Tube-Socket cut-outs for Belton Octal sockets. Adapter available to mount Belton noval sockets.
TT-Chassis Aluminium - Typ 008, Dumble Grösse / Size : 490 x 200 x 65 mm (Dumble Size) Material: 2 mm Aluminium Note: aluminum casing might have production-related marks on the surface caused by the sheet metal bender. The use of a front and rear is recommended, if this should bother.
Aluminium Chassis Grösse / Size: 480 x 160 x 65 2 mm Aluminium
Aluminium Chassis Grösse / Size: 365 x 180/160 x 45 mm 2 mm Aluminium
5E3 Generic Aluminium Chassis Size: 370 x 105 x 68 mm Material: 2 mm Aluminium (AlMg3) Lettering: none Made in Germany
5F6A Generic Aluminium Chassis Size: 509 x 105 x 68 mm Material: 2 mm Aluminium (AlMg3) Lettering: none Made in Germany
Size: 285 x 167 x 60 mm Material: 2 mm Aluminium (AlMg3) Made in Germany
Marshall JTM45 Reissue Style Chassis Size WxHxD: 465 x 63 x 165 mm PT Cut-out: 70 x 69 mm Material: 2 mm Aluminium (AllMg3) Tube-Town's reissue version of the JTM45 chassis with a adjusted cut-out for the currently available JTM45 power transformers from Marshall, Hammond and other manufacturers! Laser-cut housing with bolted side panels- very high stability. Please note the list mt recommended accessories!
TT Standard-Chassis for LoV Projects Size: ca. 205 x 138 x 45 mm
Material: 2 mm Aluminium Screws, nuts and sockets included. The chassis is not assembled.
Hint: if you want to design your own faceplate for this chassis than you can find the templates below.
TT Chassis Aluminium for BananaPro and similar pedals. Material: 1,5 mm Aluminium
NOT INCLUDED: Jacks, DC, Switche and protection cage
TT-Chassis Fender Style 5E3
Dimensions: 369 x 67 x 106 mm (W x H x D) Attention: The Hammond Powertransformer 290AEX / 291AEX does not fit onto this chassis. Please use 290BEX/291BEX instead. The platevoltage of the 290BEX is 10V higher and it has a bias tab too but that is not a problem !
