Service your poweramps fast and easy: a simple bias-probe for use with any voltage-meter ! Just plug in the bias-probe between the powertube and the tube-socket, messure the idle current and setup the bias - that's all.
To operate this prove a voltage meter is needed, which is not included in the kit.
This probe is for all EL34, 6L6, KT88, 6550 and similar tubes
Degree of difficulty: simple
metal, chrome finish
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years
For further details please see the datasheet.
Superflat 6.3 mm jack plug, massive pin with gold-plated tip, solder version. Black metal housing. 90° angled, moisture-repellent insulation. Cable Ø 4.0 - 6.4 mm. With clamping strain relief.
Ideal for space-saving cabling of effects pedal boards !
Standard Recovery Rectifier
Voltage max: 1000V
Current Rating: 1A
Forward Current: 1A
Forward Current Avg Rectified, IF(AV): 1A
Forward Surge Current Max, Ifsm: 1A
Forward Voltage: 1 V
Forward Voltage Max, VF:1.3V