|
WGS G12C 12" / 75 W / 8 Ohm
The G12C is a 12" ceramic speaker with a 30 oz motor and seamed cone. Its comparable to the Jensen C12N. However, the G12C has a warmer sound and more depth in the tone. This speaker has lots of character
Leistung: 75 W RMS
Magnet: 30 oz Alnico
Nettogewicht: 7 pounds / 3.175 kg
Thielle-Small Parameters (8 Ohm Version)
| Resonant Frequency (Fs) |
Hz |
| DC Resistance (Re) |
Ohm |
| Coil Inductance (Le) |
mH |
| Mechanical Q (Qms) |
|
| Electromagnetic Q (Qes) |
|
| Total Q (Qts) |
|
| Compliance Equivalent Volume (Vas) |
cu ft |
| Mechanical Compliance of Suspension (Cms) |
mm/N |
| BL Product (BL) |
T-M |
| Diaphragm Mass Inc. Airload (Mms) |
grams |
| Surface Area of Cone (Sd) |
cu cm |
| Sound Pressure Level (spl) |
db |
|
|
WGS G12C 12" / 75 W / 8 Ohm
|
89,00 EUR
|
|
|
|
TT-Chassis Alu Typ 009 - 480 x 160 x 65
Aluminium Chassis
Grösse / Size: 480 x 160 x 65
2 mm Aluminium
|
|
TT-Chassis Alu Typ 009 - 480 x 160 x 65
|
18,50 EUR
|
|
|
|
Elektrolyt 22 µF @ 63 V
| Type: |
Electrolytic capacitor |
| Capacitance: |
22 µF |
| Voltage Rating: |
63 V |
| Tolerance: |
- 10 % / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 6 mm x 10 mm |
| Termination Style: |
axial |
|
|
Elektrolyt 22 µF @ 63 V
|
0,40 EUR
|
|
|
|
F+T 15 µF @ 450 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
15 µF |
| Voltage Rating: |
450 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 14 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 15 µF @ 450 Volt, axial
|
0,95 EUR
|
|
|
|
Diode UF5408
|
|
Diode UF5408
|
0,45 EUR
|
|
|
|
DC Jack 2.1 mm, Metall
Ø-Inside: 2,1 mm
Ø-Outside: 10,7 mm
|
|
DC Jack 2.1 mm, Metall
|
0,75 EUR
|
|
|
|
DC Jack 2.1 mm
|
|
DC Jack 2.1 mm
|
0,89 EUR
|
|
|
|
CTS 3 MOhm log, reverse
| Type: |
Panel Mount Potentiometer |
| Power Rating: |
0,5 W |
| Voltage Rating: |
750 V DC |
| Shaft: |
6,10 mm, knurled |
| Shaft length: |
15 mm |
| Drill Ø: |
9,4 mm |
| Termination: |
Solder lugs |
| Dimension: |
24 mm |
|
|
CTS 3 MOhm log, reverse
|
2,50 EUR
|
|
|
|
Hammond Diecast 1590B
- Rugged, diecast aluminum alloy, electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Paint is only applied to the exterior surface to maintain RFI/EMI integrity. Black screws are included to enhance appearance.
- Designed to meet IP54.
- Screws included
|
|
Hammond Diecast 1590B
|
7,20 EUR
|
|
|
|
CTS 1 MOhm log / Audio Push-Pull
| Type: |
Panel Mount Potentiometer |
| |
Push-Pull |
| Power Rating: |
0,5 W |
| Voltage Rating: |
750 V DC |
| Shaft: |
6.35 mm, solid shaft |
| Shaft length: |
15 mm |
| Drill Ø: |
9,4 mm |
| Termination: |
Solder lugs |
| Dimension: |
24 mm |
|
|
CTS 1 MOhm log / Audio Push-Pull
|
8,25 EUR
|
|
|
