|
Miniatur ChickenHead Knob dark blue
| Type |
Chickenhead, Mini |
| Material: |
Phenolic |
| Shaft Size: |
6 - 6,3 mm |
| Size |
22.75 x 18.7 mm |
| Mounting: |
Set-Screw |
|
|
Miniatur ChickenHead Knob dark blue
|
1,00 EUR
|
|
|
|
Chickenhead Redwine
| Type |
Chickenhead |
| Material: |
Phenolic |
| Shaft Size: |
6 - 6,3 mm |
| Size |
32 x 13,7 mm |
| Mounting: |
Set-Screw |
|
|
Chickenhead Redwine
|
1,09 EUR
|
|
|
|
Footswitch 3PDT
| Type: |
Footswitch |
| Version: |
3PDT Latching |
| |
for True Bypass |
| Rating: |
1A/9VDC |
| Contact resistance: |
<30mΩ |
| Insulation resistance: |
500VDC-100MΩ min. |
| Dielectric strength: |
500VAC for 1 minute |
| Operating Life: |
30.000 cycles |
| Termination Style: |
solder-lugs |
|
|
Footswitch 3PDT
|
4,80 EUR
|
|
|
|
Xicon 42TM018 / 1:1
Xicon Ultra-Mini Audio-Transformers
| Typ / Type: |
42TM018-RC |
| Impedanz / Impedance: |
10 k CT - 10 k CT |
| Widerstand / Resistance: |
550 : 550 |
| Kern / Core: |
EI19 |
| Windungen / Turns: |
1 : 1 |
|
|
Xicon 42TM018 / 1:1
|
3,55 EUR
|
|
|
|
Chickenhead blue
| Type |
Chickenhead |
| Material: |
Phenolic |
| Shaft Size: |
6 - 6,3 mm |
| Size |
32 x 13,7 mm |
| Mounting: |
Set-Screw |
|
|
Chickenhead blue
|
0,90 EUR
|
|
|
|
Bulb 240 Volt
|
|
Bulb 240 Volt
|
1,75 EUR
|
|
|
|
Fender Jewel red
|
|
Fender Jewel red
|
2,70 EUR
|
|
|
|
Fender Pilot Light Assemply / Lamp Holder
Replacment for Fender Amps
| Chassis Hole: |
17,5 mm |
| Threading: |
9/16 - 24 |
| |
|
|
|
Fender Pilot Light Assemply / Lamp Holder
|
2,20 EUR
|
|
|
|
TT-Chassis Alu Typ 006 - 365 x 160 x 80
Aluminium Chassis
Grösse / Size: 365 x 160 x 80
2 mm Aluminium
Note: aluminum casing might have production-related marks on the surface caused by the sheet metal bender. The use of a front and rear is recommended, if this should bother.
|
|
TT-Chassis Alu Typ 006 - 365 x 160 x 80
|
15,90 EUR
|
|
|
|
Power Jack w/ fuseholder, Snap-in
up to T 70 °C
with one fuse holders 5.0 x 20 mm
Housing: polyamide
UL 94 V-0, black
for snap-on mounting
Double-pole + protective ground 10 A/250 V
single-pole fusing with bridge to the fuse holder at the L terminal
fuse holder terminals for soldering
Design to IEC/EN 60320-1
fuse holder to IEC/EN 60127-6
Certifications: ENEC, Semko, UL, CSA
|
|
Power Jack w/ fuseholder, Snap-in
|
3,33 EUR
|
|
|
