|
Alpha 100 kOhm log / 16 mm
| Type: |
Panel Mount Potentiometer |
| Power Rating: |
0,125 W log / 0,2 W linear |
| Voltage Rating: |
150 V DC Audio / 200 V DC linear |
| Tolerance: |
20% |
| Shaft: |
6,3 mm, Solid Shaft |
| Shaft length: |
15 mm |
| Drill Ø: |
M7 (6,8 mm) |
| Termination: |
Solder lugs |
| Dimension: |
16 mm |
|
|
Alpha 100 kOhm log / 16 mm
|
1,20 EUR
|
|
|
|
TT Potentiometer 16 mm 250k log
| Electrical Characteristics |
| Total Resistance Tolerance |
+/- 20% |
| Rated Power |
B/Lin Taper: 0,2 W
A/Log Taper: 0,1 W |
| Max. Operating Voltage |
B/Lin Taper: 200 V AC
A/Log Taper: 150V AC |
| Noise |
47 mV max. |
| Insulation Resistance |
500 V DC 1000MOhm |
| Withstand Voltage |
1 minute 500 V AC |
| Rotational Life |
15000 Cycles |
| Mechanical Characteristics |
| Shaft Diameter |
6 mm |
| Shaft Type |
Split Shaft |
| Shaft Length |
ca. 9 mm |
| Bushing Length |
6,5 mm |
| Body Diameter |
16 mm |
| Connectors |
Solder Lugs |
| Total Rotational Angle |
300° +/- 5° |
| Rotational Torque |
30~200gf.cm |
| Solder Heat Resistance |
300°C, 3 S |
| Material |
Shaft: Cast Iron (Aluminium Zinc)
Bushing Material: Cast Iron |
|
|
TT Potentiometer 16 mm 250k log
|
0,69 EUR
|
|
|
|
Leather Case Handle, dark blue
| Type: |
Leather Case Handle |
| Version: |
DogBone Style |
| Mounting fittings: |
Steel, nickel plated |
| Color: |
Dark blue |
| Mounting hardware: |
Screws and t-nuts included |
|
|
Leather Case Handle, dark blue
|
12,50 EUR
|
|
|
|
Neutrik NP2C-BAG - 1/4" Phone Plugs
NP2C-BAG
2 pole 1/4" professional phone plug, black metal housing, Nickel contacts
Professional phone plug with robust metal shell and chuck type strain relief.
Features & Benefits
- Rugged diecast metal shell
- Chuck type strain relief for optimum cable protection
- Precision machined one-piece contacts - avoid hook up of tip contact
- Meets all prevailing standards
|
|
Neutrik NP2C-BAG - 1/4" Phone Plugs
|
3,40 EUR
|
|
|
|
F+T 10 µF @ 350 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
10 µF |
| Voltage Rating: |
350 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 10 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 10 µF @ 350 Volt, axial
|
0,82 EUR
|
|
|
|
Alpha 500 kOhm log / Audio
| Type: |
Panel Mount Potentiometer |
| Power Rating: |
0,25 W log / 0,5 W linear |
| Voltage Rating: |
250 V DC Audio / 500 V DC linear |
| Tolerance: |
20% |
| Shaft: |
6,35 mm, Solid Shaft |
| Shaft length: |
15 mm |
| Drill Ø: |
M8 (7,8 mm) |
| Termination: |
Solder lugs |
| Dimension: |
24 mm |
|
|
Alpha 500 kOhm log / Audio
|
1,30 EUR
|
|
|
|
Resistor Metaloxide 5 Watts / 1 kOhms / Small Size
|
|
Resistor Metaloxide 5 Watts / 1 kOhms / Small Size
|
0,73 EUR
|
|
|
|
Alpha 500 kOhm log / 16 mm
| Type: |
Panel Mount Potentiometer |
| Power Rating: |
0,125 W log / 0,2 W linear |
| Voltage Rating: |
150 V DC Audio / 200 V DC linear |
| Tolerance: |
20% |
| Shaft: |
6,3 mm, Solid Shaft |
| Shaft length: |
15 mm |
| Drill Ø: |
M7 (6,8 mm) |
| Termination: |
Solder lugs |
| Dimension: |
16 mm |
|
|
Alpha 500 kOhm log / 16 mm
|
1,20 EUR
|
|
|
|
Alpha 250 kOhm linear / 16 mm
| Type: |
Panel Mount Potentiometer |
| Power Rating: |
0,125 W log / 0,2 W linear |
| Voltage Rating: |
150 V DC Audio / 200 V DC linear |
| Tolerance: |
20% |
| Shaft: |
6,3 mm, Solid Shaft |
| Shaft length: |
15 mm |
| Drill Ø: |
M7 (6,8 mm) |
| Termination: |
Solder lugs |
| Dimension: |
16 mm |
|
|
Alpha 250 kOhm linear / 16 mm
|
1,20 EUR
|
|
|
|
TT E83CC / 12AX7 Standard
Low Noisefloor
Low Microphonics
ca. 7% more open-loop gain than the TT12AX7
Short plates
Full low end like the JJ ECC803
Soft top end, less aggressive than the TT12AX7
Recommended for hi gain stages or modern hi gain amps or amps with a high noise floor but also for bass amps.
|
|
TT E83CC / 12AX7 Standard
|
8,75 EUR
|
|
|
