|
Elektrolyt 22 µF @ 63 V
| Type: |
Electrolytic capacitor |
| Capacitance: |
22 µF |
| Voltage Rating: |
63 V |
| Tolerance: |
- 10 % / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 6 mm x 10 mm |
| Termination Style: |
axial |
|
|
Elektrolyt 22 µF @ 63 V
|
0,40 EUR
|
|
|
|
Turret Tube-Town Type 42 - 25 pcs Pack
Tube-Tow Turrets Type 32
for 3 mm Boards
|
|
Turret Tube-Town Type 42 - 25 pcs Pack
|
3,65 EUR
|
|
|
|
WGS Reaper HP 12" / 50 W / 16 Ohm
The 12” high power Reaper™ is designed to go where the 30 watt version couldn't. If you want a good clean tone with just the right amount of breakup at medium-high volume, then this is your speaker. This 50 watt version is both warmer and more powerful than the 30 watt version.
Thielle-Small Parameters (8 Ohm Version)
| Resonant Frequency (Fs) |
93 Hz |
| DC Resistance (Re) |
6.8 Ohm |
| Coil Inductance (Le) |
0.35 mH |
| Mechanical Q (Qms) |
9.05 |
| Electromagnetic Q (Qes) |
0.62 |
| Total Q (Qts) |
0.58 |
| Compliance Equivalent Volume (Vas) |
1.4 cu ft |
| Mechanical Compliance of Suspension (Cms) |
0.10 mm/N |
| BL Product (BL) |
13.76 T-M |
| Diaphragm Mass Inc. Airload (Mms) |
29.6 grams |
| Surface Area of Cone (Sd) |
53.24 cm 2 |
| Sound Pressure Level (spl) |
99 db |
|
|
WGS Reaper HP 12" / 50 W / 16 Ohm
|
85,00 EUR
|
|
|
|
WGS Veteran 30 12" / 60 W / 16 Ohm
The 12” Veteran 30™ speaker from WGS is tonally superior to Celestion's™ Vintage 30™ speaker. The tonal improvement is in the upper-mids. The Veteran 30™ speaker has smoothed out the upper-mid "spike" notorious in the Vintage 30™ speaker.
Thielle-Small Parameters
| Resonant Frequency (Fs) |
102 Hz |
| DC Resistance (Re) |
12.70 Ohm |
| Coil Inductance (Le) |
0.59 mH |
| Mechanical Q (Qms) |
12.00 |
| Electromagnetic Q (Qes) |
0.94 |
| Total Q (Qts) |
0.88 |
| Compliance Equivalent Volume (Vas) |
1.28 cu ft |
| Mechanical Compliance of Suspension (Cms) |
0.09 mm/N |
| BL Product (BL) |
15.23 T-M |
| Diaphragm Mass Inc. Airload (Mms) |
26.84 grams |
| Surface Area of Cone (Sd) |
53.24 cu cm |
| Sound Pressure Level (spl) |
98 db |
|
|
WGS Veteran 30 12" / 60 W / 16 Ohm
|
85,00 EUR
|
|
|
|
Alpha Rotary Switch 4 pole / 3 position
| Type: |
Alpha Rotary Switch |
| Version: |
4 pole / 3 position
Non-Shorting
|
| Shaft lenght: |
19 mm |
| Rating: |
0.3 A / 125 V/AC |
| Contact resistance: |
max. 50 mΩ |
| Insulation resistance: |
min. 100 mΩ / 500 V/DC |
| Termination Style: |
solder lugs |
|
|
Alpha Rotary Switch 4 pole / 3 position
|
3,65 EUR
|
|
|
|
Push In 50 mm / 2" Castor w. Metal Socket
Push In 50 mm / 2" Castor w. Metal Socket
Carry Weight per wheel: 20 kg / 44lb
|
|
Push In 50 mm / 2" Castor w. Metal Socket
|
8,60 EUR
|
|
|
|
Elektrolyt 2,2 µF @ 63 Volt
| Type: |
Electrolytic capacitor |
| Capacitance: |
2,2 µF |
| Voltage Rating: |
63 V |
| Tolerance: |
- 10 % / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 4,5 mm x 11 mm |
| Termination Style: |
axial |
|
|
Elektrolyt 2,2 µF @ 63 Volt
|
0,38 EUR
|
|
|
|
Fuse 1 A slow blow
| Rated Voltage: |
250 VAC |
| Contact caps: |
nickel-plated brass |
| Size: |
Ø 5 mm x 20 mm |
|
|
Fuse 1 A slow blow
|
0,27 EUR
|
|
|
|
F+T 100 µF @ 100 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
100 µF |
| Voltage Rating: |
100 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 10 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 100 µF @ 100 Volt, axial
|
0,83 EUR
|
|
|
|
TT-CH10 Choke 10 H
Technical Data:
Inductance: 10 H
|
|
TT-CH10 Choke 10 H
|
25,00 EUR
|
|
|
