Grösse / Size: 480 x 160 x 65
2 mm Aluminium
Note: aluminum casing might have production-related marks on the surface caused by the sheet metal bender. The use of a front and rear is recommended, if this should bother.
up to T 70 °C
with one fuse holders 5.0 x 20 mm
UL 94 V-0, black
for snap-on mounting
Double-pole + protective ground 10 A/250 V
single-pole fusing with bridge to the fuse holder at the L terminal
fuse holder terminals for soldering
Design to IEC/EN 60320-1
fuse holder to IEC/EN 60127-6
Certifications: ENEC, Semko, UL, CSA
Can be used as Voltage or Impedance selector.
Capacitor Clamp d = 40 mm