|
F+T 10 µF @ 350 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
10 µF |
| Voltage Rating: |
350 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 10 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 10 µF @ 350 Volt, axial
|
0,82 EUR
|
|
|
|
High Power Resistor 15R (16 Ohm) / 150 Watt
High Power Resistors
Rating: 15 Ohms / 5%
Power: 150 Watt / 55 Watt without heat sink
Size: 97 x 47 mm
Aluminium Chassis
Norm: MiL-R-18546 E (RE 70)
Great for attenuators, power soaks and dummy loads
Very low background noise
RoHS Compliant
|
|
High Power Resistor 15R (16 Ohm) / 150 Watt
|
9,20 EUR
|
|
|
|
High Power Resistor 8R2 (8 Ohm) / 100 Watt
High Power Resistors
Rating: 8.2 Ohms / 5%
Power: 100 Watt / 40 Watt without heat sink
Size: 64 x 47 mm
Aluminium Chassis
Norm: MiL-R-18546 E (RE 70)
Great for attenuators, power soaks and dummy loads
Very low background noise
RoHS Compliant
|
|
High Power Resistor 8R2 (8 Ohm) / 100 Watt
|
7,50 EUR
|
|
|
|
Hammond Diecast 1590D
- Rugged, diecast aluminum alloy, electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Paint is only applied to the exterior surface to maintain RFI/EMI integrity. Black screws are included to enhance appearance.
- Designed to meet IP54.
- Screws included
|
|
Hammond Diecast 1590D
|
17,10 EUR
|
|
|
|
SP coil 1,5 mH - 300 Watt
Luftspule mit verzinnten Drahtenden. Hoch belastbar, auf stabilem Wickelkörper.
Air-Core coil with tinned wire ends. High power handling, solid winding form.
Höhe/Hight: 30 mm
Durchmesser/Diameter: 70 mm
Drahtstärke/Wire diameter: 1,2 mm
Innenwiderstand/Internal resistance 0,5 Ohm
Leistung / Power: 300 Watt
|
|
SP coil 1,5 mH - 300 Watt
|
20,55 EUR
|
|
|
|
SP coil 1 mH - 300 Watt
Luftspule mit verzinnten Drahtenden. Hoch belastbar, auf stabilem Wickelkörper.
Air-Core coil with tinned wire ends. High power handling, solid winding form.
Höhe/Hight: 19 mm
Durchmesser/Diameter: 59 mm
Drahtstärke/Wire diameter: 1,2 mm
Innenwiderstand/Internal resistance 0,5 Ohm
Leistung / Power: 300 Watt
|
|
SP coil 1 mH - 300 Watt
|
16,60 EUR
|
|
|
|
Chickenhead black
| Type |
Chickenhead |
| Material: |
Phenolic |
| Shaft Size: |
6 - 6,3 mm |
| Size |
32 x 13,7 mm |
| Mounting: |
Set-Screw |
|
|
Chickenhead black
|
0,90 EUR
|
|
|
|
Mallory 150's 0,01 µF / 630 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
- Epoxy end fill meets UL94V-0
- Non inductively wound
- Flame retardant outer wrap meets UL510
- Non polar
Specifications:
Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years
For further details please see the datasheet.
|
|
Mallory 150's 0,01 µF / 630 VDC
|
0,68 EUR
|
|
|
|
F+T 22 µF @ 450 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
22 µF |
| Voltage Rating: |
450 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 16 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 22 µF @ 450 Volt, axial
|
1,20 EUR
|
|
|
|
Silver Mica 250 pF
| Type: |
Mica Capacitors |
| Voltage Rating: |
500 V |
| Tolerance: |
5% |
| Operating Temperature Range: |
- 50°C / + 150°C |
| Termination Style: |
radial |
|
|
Silver Mica 250 pF
|
0,55 EUR
|
|
|
