suitable rubber ring for retainer re-02.
Silicon damper for better protection from vibration.

Cable Shoe for wires from 1 mm² up to 1,5 mm² diameter, tin-plated

Sounds similar to the "normal" JJ 12AX7, but the overall sound is more fuller and powerfull with a bigger bass. In comparison to its litte brother JJ12AX7 the JJ ECC803 also has much bigger plates and draws much more current if used with standard 12AX7 parameters. The quality of this tube is absolutly OK and it is suited for instrumental amps as well as audio and / or HiFi Tube-Amps
Highly recommende also for use in so called HiGain-Amps where the sounds are often a little bit cold and harsh.

Retainer for EL34 / 6L6 Tubes

• self-healing
• non inductive

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

• Epoxy end fill meets UL94V-0
• Non inductively wound
• Flame retardant outer wrap meets UL510
• Non polar

Specifications:

Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years

For further details please see the datasheet.

Ring Tongue Cable lugs
for cables 1.5 - 2 mm²
Made of tinned electrolyte copper. With crimp terminal.
d = 5.3 mm