|
Chassis 1441-12 black
-
Spot welded steel - heavy duty construction chassis.
-
Finished in ASA 61 smooth grey or satin black powder paint.
-
Optional bottom plates are punched with 4 holes – 3/16” diameter (Chassis requires drilling to install optional bottom plates).
-
Hardware not provided
|
|
Chassis 1441-12 black
|
11,40 EUR
|
|
|
|
Hammond Diecast 1590BRD - RED
-
Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
-
Painted "Stomp Box" versions are coated with a smooth gloss polyester powder paint for a lasting finish, even after machining.
- Smooth paint allows for easy adhesion of labels and/or silk screens.
- Paint colors are matched to standard RAL colors.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
-
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
|
|
Hammond Diecast 1590BRD - RED
|
10,75 EUR
|
|
|
|
Alpha Footswitch 3PDT Heavy Duty - PCB
| Type: |
Footswitch |
| Version: |
3PDT Latching |
| Rating: |
1A/9VDC |
| Contact resistance: |
<30mΩ |
| Insulation resistance: |
500VDC-100MΩ min. |
| Dielectric strength: |
500VAC for 1 minute |
| Operating Life: |
30.000 cycles |
| Termination Style: |
PCB - mount |
|
|
Alpha Footswitch 3PDT Heavy Duty - PCB
|
3,20 EUR
|
|
|
|
Hammond Diecast 1590BYL - YELLOW
-
Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
-
Painted "Stomp Box" versions are coated with a smooth gloss polyester powder paint for a lasting finish, even after machining.
- Smooth paint allows for easy adhesion of labels and/or silk screens.
- Paint colors are matched to standard RAL colors.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
-
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
|
|
Hammond Diecast 1590BYL - YELLOW
|
10,75 EUR
|
|
|
|
Bottom 1431-12 black
Steel Bottom Plate for Hammond 1441 and 1431-Series Chassis
|
|
Bottom 1431-12 black
|
6,00 EUR
|
|
|
|
Power Jack
Power Jack, Chassis mount
Ratings IEC: 10 A / 250 VAC; 50 Hz
Ratings UL/CSA: 15 A / 250 VAC; 60 Hz
Dielectric Strength:
> 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Temp.:-25 °C to 70 °C
Degree of Protection: from front side IP 20 acc. to IEC 60529
Protection Class:Suitable for appliances with protection class 1 acc. to IEC 61140
Material: Housing PA6, black, UL 94V-0
|
|
Power Jack
|
1,43 EUR
|
|
|
|
Neutrik NMJ4HC-S - 6,3 mm Mono switched
NMJ4HC-S
1/4" mono jack, switched, with chrome ferrule and standard solder lugs
Mounting nut included
|
| |
|
Features & Benefits
- Wide body and extremely durable contacts
- Mates with all mono A-gauge plugs acc. EIA RS-453 standard
|
|
|
Neutrik NMJ4HC-S - 6,3 mm Mono switched
|
1,06 EUR
|
|
|
|
Elektrolyt 22 µF @ 450V
| Type: |
Electrolytic can capacitor |
| Capacitance: |
22 µF |
| Voltage Rating: |
450 V |
| Tolerance: |
- 20 % / +20 % |
| Operating Temperature Range: |
- 40°C / + 105 °C |
| Dimensions: |
Ø 16 mm x 32 mm |
| Termination Style: |
radial |
| Grid: |
7,5 |
|
|
Elektrolyt 22 µF @ 450V
|
0,49 EUR
|
|
|
|
Carbon Composition 0,5 Watt - 470 Ohm
Carbon Composition Resistors
- ½ watt
- -55° C to 125° C operating range
- +/- 5% tolerance
- 350 V working, 700 V overload
- Low inductance
- Low capacitance
|
|
Carbon Composition 0,5 Watt - 470 Ohm
|
0,30 EUR
|
|
|
|
Footswitch 3PDT
| Type: |
Footswitch |
| Version: |
3PDT Latching |
| |
for True Bypass |
| Rating: |
1A/9VDC |
| Contact resistance: |
<30mΩ |
| Insulation resistance: |
500VDC-100MΩ min. |
| Dielectric strength: |
500VAC for 1 minute |
| Operating Life: |
30.000 cycles |
| Termination Style: |
solder-lugs |
|
|
Footswitch 3PDT
|
4,80 EUR
|
|
|
