|
Retainer EL84
Retainer for EL84 / EL844Tubes
|
|
Retainer EL84
|
1,59 EUR
|
|
|
|
TT 7025 Black Plate - V1 Selection
This tube works best in classic tube-amp designs and layouts with a low complexity and a "straight through" signal path. In suchs amps the TT7025 convinced with a smooth, warme and well balanced, vintage-like sound.
We do not recommend this tube for use in modern HiGain-Amps or in PI-Stages.
|
|
TT 7025 Black Plate - V1 Selection
|
16,01 EUR
|
|
|
|
Wires with Clamps, 10 pcs set
10 Cables with alligator clamps on each side. Length ca. 50 cm.
Colors: red, green, black, white, yellow.
|
|
Wires with Clamps, 10 pcs set
|
1,59 EUR
|
|
|
|
Signal wire 0,5 mm² shielded
|
|
Signal wire 0,5 mm² shielded
|
1,40 EUR
|
|
|
|
Mallory 150's 0,022 µF / 250 VDC
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
- Epoxy end fill meets UL94V-0
- Non inductively wound
- Flame retardant outer wrap meets UL510
- Non polar
Specifications:
Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years
For further details please see the datasheet.
|
|
Mallory 150's 0,022 µF / 250 VDC
|
0,54 EUR
|
|
|
|
Silver Mica 1000 pF
| Type: |
Mica Capacitors |
| Voltage Rating: |
500 V |
| Tolerance: |
5% |
| Operating Temperature Range: |
- 50°C / + 150°C |
| Termination Style: |
radial |
|
|
Silver Mica 1000 pF
|
0,95 EUR
|
|
|
|
F+T 22 µF @ 450 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
22 µF |
| Voltage Rating: |
450 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 16 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 22 µF @ 450 Volt, axial
|
1,55 EUR
|
|
|
|
Rubber foot with steel insert 38*15
Rubber foot with steel insert
Size: 38 * 15 mm
|
|
Rubber foot with steel insert 38*15
|
0,80 EUR
|
|
|
|
TT Potentiometer 16 mm 250k lin
| Electrical Characteristics |
| Total Resistance Tolerance |
+/- 20% |
| Rated Power |
B/Lin Taper: 0,2 W
A/Log Taper: 0,1 W |
| Max. Operating Voltage |
B/Lin Taper: 200 V AC
A/Log Taper: 150V AC |
| Noise |
47 mV max. |
| Insulation Resistance |
500 V DC 1000MOhm |
| Withstand Voltage |
1 minute 500 V AC |
| Rotational Life |
15000 Cycles |
| Mechanical Characteristics |
| Shaft Diameter |
6 mm |
| Shaft Type |
Split Shaft |
| Shaft Length |
ca. 9 mm |
| Bushing Length |
6,5 mm |
| Body Diameter |
16 mm |
| Connectors |
Solder Lugs |
| Total Rotational Angle |
300° +/- 5° |
| Rotational Torque |
30~200gf.cm |
| Solder Heat Resistance |
300°C, 3 S |
| Material |
Shaft: Cast Iron (Aluminium Zinc)
Bushing Material: Cast Iron |
|
|
TT Potentiometer 16 mm 250k lin
|
0,69 EUR
|
|
|
|
JJ 12AX7 / ECC83S
Sweet and warm sounding preamp tube with high gain.
We recommend this tube for guitar/bass amps
|
|
JJ 12AX7 / ECC83S
|
7,85 EUR
|
|
|
