|
Terminal 10 + 18
Length: 266 mm
Solder Lugs: 10 + 18
Width: 18 mm
Hartpaper
Standard type comprises 28 tags, 18 insulated and 10 earthed/fixing
|
|
Terminal 10 + 18
|
2,25 EUR
|
|
|
|
Bourns Potentiometer 250k Log
This specialty potentiometer is commonly used in guitar and bass amplifiers. However, it is also suitable for use in electric guitars and basses. This product is designed with the features most widely requested by amplifier designers.
- Features
- Rotational life: 200,000 shaft revolutions
- Tight TR tolerance ±15 %
- Plain shaft
- 3/8 “ / 0,9525 mm diameter brass bushing
- 1/4" / 6,3 mm Shaft
- RoHS compliant
- Applications
- Electric guitars
- Bass guitars
- Guitar amplifiers
|
|
Bourns Potentiometer 250k Log
|
3,50 EUR
|
|
|
|
Bourns Potentiometer 25k Linear
This specialty potentiometer is commonly used in guitar and bass amplifiers. However, it is also suitable for use in electric guitars and basses. This product is designed with the features most widely requested by amplifier designers.
- Features
- Rotational life: 200,000 shaft revolutions
- Tight TR tolerance ±15 %
- Plain shaft
- 3/8 “ / 0,9525 mm diameter brass bushing
- 1/4" / 6,3 mm Shaft
- RoHS compliant
- Applications
- Electric guitars
- Bass guitars
- Guitar amplifiers
|
|
Bourns Potentiometer 25k Linear
|
3,50 EUR
|
|
|
|
Bourns Potentiometer 1M Log
This specialty potentiometer is commonly used in guitar and bass amplifiers. However, it is also suitable for use in electric guitars and basses. This product is designed with the features most widely requested by amplifier designers.
- Features
- Rotational life: 200,000 shaft revolutions
- Tight TR tolerance ±15 %
- Plain shaft
- 3/8 “ / 0,9525 mm diameter brass bushing
- 1/4" / 6,3 mm Shaft
- RoHS compliant
- Applications
- Electric guitars
- Bass guitars
- Guitar amplifiers
|
|
Bourns Potentiometer 1M Log
|
3,50 EUR
|
|
|
|
Visaton Bi-Polar 4,7 µF
| Type: |
Bipolar Electrolytic capacitor |
| Capacitance: |
4,7 µF |
| Voltage Rating: |
35 V AC |
| Power: |
300 W / 4 Ohm |
| |
150 W / 8 Ohm |
| Dimensions: |
Ø 12 mm x 26 mm |
| Termination Style: |
axial |
|
|
Visaton Bi-Polar 4,7 µF
|
1,34 EUR
|
|
|
|
SoZo Mustard Cap 0.022 µF / 400 V
SoZo Mustard Cap™
All capacitors meet MIL-STD. 202 C, Method 103 B ± 5% tolerance.
Every single capacitor fully tested!
Not RoHS conform.
|
|
SoZo Mustard Cap 0.022 µF / 400 V
|
1,90 EUR
|
|
|
|
SoZo Mustard Cap 0.1 µF / 400 V
SoZo Mustard Cap™
All capacitors meet MIL-STD. 202 C, Method 103 B ± 5% tolerance.
Every single capacitor fully tested!
Not RoHS conform.
|
|
SoZo Mustard Cap 0.1 µF / 400 V
|
2,30 EUR
|
|
|
|
F+T 47 µF @ 500 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
47 µF |
| Voltage Rating: |
500 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 21 mm x 37 mm |
| Termination Style: |
axial |
|
|
F+T 47 µF @ 500 Volt, axial
|
5,11 EUR
|
|
|
|
F+T 22 µF @ 500 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
22 µF |
| Voltage Rating: |
500 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 18 mm x 39 mm |
| Termination Style: |
axial |
|
|
F+T 22 µF @ 500 Volt, axial
|
3,15 EUR
|
|
|
|
TT E83CC / 12AX7 V1
Tube-Town E83CC Preamp-Tube V1-Selection
Low Noisefloor
Low Microphonics
ca. 7% more open-loop gain than the TT12AX7
Short plates
Full low end like the JJ ECC803
Soft top end, less aggressive than the TT12AX7
Recommended for hi gain stages or modern hi gain amps or amps with a high noise floor but also for bass amps.
|
|
TT E83CC / 12AX7 V1
|
13,49 EUR
|
|
|
