Mullard reincarnated. With the new EL34EH, Marshall amp owners can recreate the balanced tone, deep, tight bass, sweet mids, and well-defined highs of the original equipment Mullards. Innovative design and precision construction give the EL34EH exceptionally smooth and an ideal balance of pleasing even-order harmonics while virtually eliminating undesirable odd-order harmonics.

Material: 1.5 mm Transply
Color: see option list
Front and Rear panel

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction protection against access of dust and splashing water.
• Unpainted version is vibra finished for a smooth surface with no sharp edges.
• Painted version is painted with tough - satin black polyester - powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance.
• Four M3.5 x 0.6 x 12 mm long stainless steel, Philips head, machine screws secure lid - into factory tapped holes.
• Designed to meet IP54
• No internal ribs for easy installation of connectors without interference or additional milling.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Size: 100 x 160 mm (Euro-Form)
One-side copper layer: 35 µ
Material: FR2, 1,5 mm
Grid: 2,54 mm
Hole: Ø ca. 1 mm

Hardwareset:
8 X Cabinet corner w/ cutaway 2 leg, silver (ah4023b)
16 X Screws with extra flat head, black
Internal radius: 12 mm

Rubber foot with steel insert
Size: 38 * 15 mm

The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound.

Custom Shop Faceplate, Transply, laser engraved

How does it work ?

a) Select the required size, material and color combination

Hint: Several objects can be placed on a work surface, so cost-efficient material processing is possible. Example: two plates with a size of 55 x 490 mm (front and back plate) can be placed on a work space H2 with the overall size of 150 x 600 mm and can be ordered together. The configurations and optimizations have to be present in the submitted data.  

b) Submit the order through the online shop.

c) Prepare the artwork according to our specifications and send it by e-mail.

d) That's it. The rest is our job.

Note on the data check option

With the initial order of  a new faceplate, a logo or something similar we highly recommend to choose the  optional "data check".
Here, we test the artwork for basis errors and make smaler corrections like incorrect defined cutting lines (only if this lines are colored in red), wrong font colors or an incorrect color mode. This helps to significantly reduce errors.
We do NOT check for layout errors or mistakes in the content. The customer is fully responsible for his artwork and layout.
In a repeated order the standard data check is not necessary since all data are available from the first order. Please let us know the file number which was given on the initial invoice in this case.