|
JJ 12AX7 / ECC83S
Sweet and warm sounding preamp tube with high gain.
We recommend this tube for guitar/bass amps
|
|
JJ 12AX7 / ECC83S
|
7,85 EUR
|
|
|
|
Socket Noval Ceramic, Chassis w/ Shield, SET OF 10
| Type: |
Noval Socket |
| Qty: |
SET OF 10 SOCKETS
|
| Version: |
Ceramic, High Quality |
| |
Chassis mount with shield |
| Termination Style: |
solder lugs |
| for Tube Type: |
12AX7, 12AT7, 12AU7, EL84, |
| |
EZ81, EL844 etc. |
|
|
Socket Noval Ceramic, Chassis w/ Shield, SET OF 10
|
14,95 EUR
|
|
|
|
F+T 47 µF @ 450 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
47 µF |
| Voltage Rating: |
450 V |
| Tolerance: |
- 20 % / +20 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 18 mm x 39 mm |
| Termination Style: |
axial |
|
|
F+T 47 µF @ 450 Volt, axial
|
1,95 EUR
|
|
|
|
F+T 15 µF @ 500 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
15 µF |
| Voltage Rating: |
500 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 16 mm x 30 mm |
| Termination Style: |
axial |
|
|
F+T 15 µF @ 500 Volt, axial
|
1,95 EUR
|
|
|
|
Ceramic Disk Capacitor 470 pF / 2 kV
| Type: |
HV ceramic disk capacitor |
| |
Epoxy resin molding |
| |
(insulating and flame retardant) |
| Voltage Rating: |
2 kV |
| Tolerance: |
- 20 % / +20 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
3 mm x 7 mm |
| Grid: |
7,5 |
|
|
Ceramic Disk Capacitor 470 pF / 2 kV
|
0,24 EUR
|
|
|
|
F+T 47 µF @ 500 Volt, axial
| Type: |
Aluminum Electrolytic Capacitors |
| Capacitance: |
47 µF |
| Voltage Rating: |
500 V |
| Tolerance: |
- 10% / +30 % |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Dimensions: |
Ø 21 mm x 37 mm |
| Termination Style: |
axial |
|
|
F+T 47 µF @ 500 Volt, axial
|
5,11 EUR
|
|
|
|
Tubular Film Capacitor 0,1 µF / 630 V
| Type: |
Tubular Metalized Polyester Film Capacitors |
| Voltage Rating: |
630 V |
| Tolerance: |
+/- 10% |
| Operating Temperature Range: |
- 40°C / + 85 °C |
| Termination Style: |
axial |
- Non-inductive
- Self healing windings.
- Similar to the Mallorys 150-Series
|
|
|
Tubular Film Capacitor 0,1 µF / 630 V
|
0,49 EUR
|
|
|
|
Orange Drop 0,1 µF @ 600 V
ORANGE DROP®, Low Loss
| Type: |
Polypropylene Film Capacitors |
| Voltage Rating: |
600 V |
| Tolerance: |
- 10 % / +10 % |
| Operating Temperature Range: |
- 55°C / + 85 °C |
| Termination Style: |
radial |
|
|
Orange Drop 0,1 µF @ 600 V
|
1,59 EUR
|
|
|
|
Sovtek 12AX7 / ECC83 LPS
LPS = Long Plate Spiral Heater
Sounds pretty good in the input section of "modern" Fender amps with more overdrive but is also very popular among the Marshall users.
|
|
Sovtek 12AX7 / ECC83 LPS
|
12,80 EUR
|
|
|
|
Jupiter Condenser "Vintage" 0,003 µF / 600 V
Jupiter Condenser “Vintage” Tone
Based closely on the Yellow Molded Astron capacitor for a more authentic tone to the time period. Construction is Aluminum Foil with Polyester(Mylar) Film Dielectric with tinned copper leads.
| Type: |
Polyester/Aluminum Foil |
| Voltage Rating: |
600VDC - Tested at 1200VDC |
| |
at three stages of production) |
| Tolerance: |
+/-10% typically much closer |
| Operating temperature: |
-55C - 85C, derate 50% at 125C |
| Leads: |
20awg Tinned Copper |
| Application: |
Guitar Amplifier, Guitar Tone Control |
Made in USA of US materials
|
|
Jupiter Condenser "Vintage" 0,003 µF / 600 V
|
3,90 EUR
|
|
|
