|
Chassis AL 1444-10
-
Spot welded heavy duty construction chassis.
-
Natural finish as shown above - protected through manufacturing and shipping with a plastic skin cover to ensure a high quality finish.
-
Optional bottom plates are punched with 4 holes (Chassis requires drilling to install optional bottom plates).
-
Hardware not provided, please order separately
|
|
Chassis AL 1444-10
|
11,80 EUR
|
|
|
|
Bridge Rectifier B500C1500 W+W-
| Type: |
Bridge Rectifier |
| Max. alternating input voltage: |
500 V |
| Repetitive peak reverse voltage: |
1000 V |
| Peak forward surge current IFSM |
50/55 A |
Repetitive peak forward current IFRM
|
10 A |
| Junction temperature: |
–50 to +150 °C |
| Size: |
19 x 3,5 x 10 mm |
|
|
Bridge Rectifier B500C1500 W+W-
|
0,73 EUR
|
|
|
|
WGS G8C 8" / 20 W / 4 Ohm
The G8C ceramic speaker will breathe new life into your small combo. This little monster puts out some serious sound. A serious upgrade for your Fender Champ.
|
|
WGS G8C 8" / 20 W / 4 Ohm
|
49,00 EUR
|
|
|
|
Tung-Sol 12AT7W / 6201 Reissue
TungSol 12AT7 Reissue
|
|
Tung-Sol 12AT7W / 6201 Reissue
|
12,95 EUR
|
|
|
|
Jupiter Condenser "Vintage" 0,02 µF / 600 V
Jupiter Condenser “Vintage” Tone
Based closely on the Yellow Molded Astron capacitor for a more authentic tone to the time period. Construction is Aluminum Foil with Polyester(Mylar) Film Dielectric with tinned copper leads.
| Type: |
Polyester/Aluminum Foil |
| Voltage Rating: |
600VDC - Tested at 1200VDC |
| |
at three stages of production) |
| Tolerance: |
+/-10% typically much closer |
| Operating temperature: |
-55C - 85C, derate 50% at 125C |
| Leads: |
20awg Tinned Copper |
| Application: |
Guitar Amplifier, Guitar Tone Control |
Made in USA of US materials
|
|
Jupiter Condenser "Vintage" 0,02 µF / 600 V
|
4,20 EUR
|
|
|
|
Rheostat Alpha 1 kOhm / 5 Watt
RoHS Compliant
|
|
Rheostat Alpha 1 kOhm / 5 Watt
|
5,20 EUR
|
|
|
|
Diode UF5408
|
|
Diode UF5408
|
0,45 EUR
|
|
|
|
Flat Cable-Plug, Cable Shoe 1 - 2,5 mm², tin-plated
Cable Shoe for wires from 1 mm² up to 1,5 mm² diameter, tin-plated
|
|
Flat Cable-Plug, Cable Shoe 1 - 2,5 mm², tin-plated
|
0,20 EUR
|
|
|
|
Rubber foot with steel insert 38*10
Rubber foot with steel insert
Size: 38 * 10 mm
|
|
Rubber foot with steel insert 38*10
|
0,60 EUR
|
|
|
|
Speaker Clamp
Plastic speaker clamp
|
|
Speaker Clamp
|
0,19 EUR
|
|
|
