Main page » Components » Sockets & Retainer » Shields & Retainer » Rubber Ring for Retainer re-02

Rubber Ring for Retainer re-02

Product No.:: re02-ring
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.007 kg per piece

0,60 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Silicone ring to protect against vibrations, suitable for retainer re-02. Retainer NOT included.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Needed for:

Retainer EL34 / 6L6

Retainer for EL34 / 6L6 Tubes

0,95 €

Customers who bought this product bought also the following products:

Miniatur-Potentiometer 100 k laydown PT15

Resistance: 100k Ohm
Power: 0,25 W
Max Voltage: 250 V
Grid 12,5/10 mm
Ø: 15,0 mm
h: 7,0 mm

0,55 €

Knob Chickenhead white

Type: Chickenhead
Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size: 32 x 13,7 mm
Mounting: Set-Screw

0,90 €

Knob Chickenhead Raised, creame

Chickenhead knob, raised

Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size 30,5 x 16 mm
Mounting: Set-Screw

0,90 €

Knob Chickenhead Mini dark blue

Type: Chickenhead, Mini
Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size: 22.75 x 18.7 mm
Mounting: Set-Screw

1,35 €

Tube-Town EZ-Board 2 x 15 Turrets, black, medium

Size: 140 x 47 mm
Material: FR4, 2 mm
Color: black
Turrets: 2 x 15

7,30 €

Alpha 250 kOhm log - REVERSE, 3,8"

Panel Mount Potentiometer 3/8"

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Drill Ø: 3/8-32 (9,45 mm)
Shaft: 6,35 mm, Solid Shaft

2,15 €

Hammond 1750PA OT for Marshall 18 Watt

Output transformer push-pull for 18 Watt amps. Primary: 8400 Ohm C.T., Power: 18 Watt.

52,30 €

TT E83CC (12AX7 / ECC83 / 7025) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Tube-Town E83CC Preamp-Tube

High-quality 12AX7 / ECC83 / 7025 preamp tube with low background noise and reduced feedback tendency due to short anode plates, as well as a powerful bass and a dense sound. Very suitable for input stages with high amplification or amplifiers with generally high gain.
Dropin replacement for all 12AX7, ECC83, 7025, and E83CC tubes.

25,90 €

Marshall Knob Gold Push-On, Set of 8

Original Marshall Gold knob, Set of 8, MRV4

Material: Phenolic
Shaft Size: 6 mm, knurled
Size: 19,2 x 15 mm
Mounting: Push-On, no D-Shaft

15,75 €

Shield Noval red

Tube Shield Noval

for noval sockets
Color: red
High: 55 mm
Including Base and Shield

1,25 €

Shield Noval blue

Tube Shield Noval

for noval sockets
Color: blue
High: 55 mm
Including Base and Shield

1,25 €

JJ 6L6 Red Label - QUAD

4 Tubes matched as quad
The JJ 6L6 is very popular because of its warm sound.

115,80 €
28,95 € per Piece

Silicon Tube Damper for 6L6

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Inner diameter ca. 34 mm
Price per damper

0,65 €

Toggle Switch APEM 631 H/2 SPST - ON-OFF

Type: Toggle Switch
Version: SPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

5,80 €

Elektrolyt 1 µF @ 350 V

Type: Electrolytic capacitor
Capacitance: 1 µF
Voltage Rating: 350 V
Tolerance: - 10 % / +30 %
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 7 mm x 27 mm
Termination Style: axial

0,44 €