Main page » Components » Sockets & Retainer » Shields & Retainer » Shield Noval silver

Shield Noval silver

Product No.:: sh-sl
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.01 kg per piece

0,89 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Tube Shield Noval

for noval sockets
Color: silver
High: 55 mm
Including Base and Shield

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Terminal 2+1 Solder lugs

2+1 Solder lugs
lugs brass, tinned

0,86 €

Alpha Potentiometer 1 MOhm log / 16 mm / DPDT Push-Pull

Power Rating: 0,125 W log / 0,2 W linear
Voltage Rating: 150 V DC Audio / 200 V DC linear
Tolerance: 20%
Shaft: 6,35 mm, Solid Shaft

3,90 €

Terminal Keystone 833 2+1 Solder lugs

2+1 Solder lugs
vertical

1,35 €

Sovtek 12AX7 / ECC83 LPS

Very linear working 12AX7 / ECC83 with long anode plates and spiral heating, which makes the tube less sensitive to interference from AC heating.
We recommend this tube for audio and high-end amps as well as for "modern" Fender amps with more overdrive, but also as an input tube in old Marshall JCM800s.

Note: Tubes equipped with long plates are commonly associated with a "warmer" or "richer" sound, whereas those with shorter plates tend to deliver a "tighter sound". However, tubes featuring long plates exhibit increased sensitivity to vibrations and mechanical disturbances, rendering them less ideal for critical applications.

21,20 €

JJ 12AX7 / ECC83S Balanced

TT Selection: Balanced
Both systems with balanced gain

Sweet and warm sounding preamp tube with high gain.

21,90 €

Alpha 250 kOhm log Stereo

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Shaft: 6,35 mm, Solid Shaft

2,95 €

JJ 12AX7 / ECC83S V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Sweet and warm sounding preamp tube with high gain.

21,90 €

F+T 22 µF @ 450 Volt, axial

Type: Aluminum Electrolytic Capacitors
Capacitance: 22 µF
Voltage Rating: 450 V
Tolerance: +/- 20%
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 16 mm x 30 mm
Termination Style: axial

2,20 €

Mallory 150's 0,001 µF / 630 VDC

Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.

0,92 €

Turret Tube-Town Type 42 - 25 pcs

Turrets
for 3 mm Boards
nickel-plated

3,90 €
0,16 € per Piece

Resistor Metaloxide 5 Watts / 100 Ohms / Small Size

Metal Oxide Film Resistors

Termination Style: Axial
Resistance: 100 Ohms
Power Rating: 5 W
Tolerance: 5 %

0,75 €

Hammond Diecast 1550P - 80 x 55 x 21 mm

Size: 80 x 55 x 21 mm
Color: natural

5,40 €

WGS G12 C/S 12" / 75 W / 8 Ohm

If you are looking for a speaker with a classic American vibe, but need a smoother more soulful top end, look no further than the WGS G12C/S.

119,00 €

JJ EL84 #05 - Fender Blues Junior

JJ EL84 #05 - Soft Plus

Not so hot than the #06 selection but still nice punch
Recommended for Fender Blues Junior and Pro Junior and similar amps.
Price for one tube.

FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifier.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.

18,00 €

Metal Film Resistor RN65D 1/2 Watt 10 k

Very low noise (- 40 dB)
Very low voltage coefficient (5 ppm/V)
Military-Spezification

0,95 €