Main page » TT-Chassis YAH100 - HiWatt Style, universal

TT-Chassis YAH100 - HiWatt Style, universal

Mobile Preview: TT-Chassis YAH100 - HiWatt Style, universal

TT-Chassis YAH100 - HiWatt Style, universal

Product No.:: tt-ch059
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 2.85 kg per piece

44,80 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

This chassis is based on a regular HiWatt chassis which was used for amplifiers up to 100 Watt. The chassis was adapted and optimized for the YAH100 kit but get used for other HiWatt Clones too.

Files

Faceplate Template

Documents

Datasheet tt-ch059 YAH100 (201 KB)

Customer reviews (4)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

René M., 05/14/2020

For use with a DR504 version you need to drill extra mounting holes for the output transformer. The test of the cut outs are fine. I have added some extra holes at the rear for FX send and return sockets extra holes at the rear for FX send and return sockets
go to post
René M., 04/11/2020

Note that the cutout for the potmeters is 9,45mm. It is recommended to order the potentiometers as 3/8 version
René M., 04/11/2020

After observing the new style Hiwatt chassis I noticed that the cutout for the impedance selector switch is 11,4mm. The shop selector switch could do with a cutout of 10,2mm. Also the hole to prevent unwanted rotation of this switch and for the pot.meter is missing. I have added these by myself by producing a small template with a cutout of 10,2mm. Also the hole to prevent unwanted rotation of this switch and for the pot.meter is missing. I have added these by myself by producing a small template
go to post
René M., 03/24/2020

Very good chassis with cut-outs for options already provided. Can be used versatile i.e. to build a DR504 etc too. Due to the original universal design by Dave Reeves this replica is recommended for all Hiwatt lovers design by Dave Reeves this replica is recommended for all Hiwatt lovers
go to post

Recommended products:

JJ 50+50 µF @500 V

Type: Cancap
Capacitance: 50 + 50 µF
Voltage Rating: 500 V
Tolerance: -10 % / +30 %
Operating Temperature Range: - 25°C / + 70 °C
Dimensions: Ø 35,5 mm x 51,4 mm
Termination Style: radial, solder-lugs

7,90 €

TT-DR103 Hiwatt® Style Powertransformer

Technical Data:

Primary: 115, 230, 240 V @ 50 Hz
Sec. 1: 0 V - 350 V @ 450 mA
Sec. 2: 6,3 V C.T. @ 8,5 A
Sec. 3: Bias Tap 50 V @ 100 mA

HiWatt Style Powertransformer, Drop-in Replacement

119,00 €

Alpha 500 kOhm log / Audio, 3,8"

Panel Mount Potentiometer 3/8"

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Drill Ø: 3/8-32 (9,45 mm)
Shaft: 6,35 mm, Solid Shaft

1,20 €

Alpha 250 kOhm linear, 3,8"

Panel Mount Potentiometer 3/8"

Power Rating: 0,25 W
Voltage Rating: 250 V AC
Tolerance: 20%
Drill Ø: 3/8-32 (9,45 mm)
Shaft: 6,35 mm, Solid Shaft

1,20 €

Tube-Town EZ-Board w/ 1x 11 Turrets, black

Size: 127 x 15,875 mm
Material: FR4, 3 mm
Color: black
Turrets: 11

4,20 €

Tube-Town EZ-Board 1 x 23 Turrets, black

Size: 241 x 15,875 mm
Material: FR4, 3 mm
Color: black
Turrets: 23

15,25 €

Tube-Town EZ-Board 2 x 15 Turrets, black, small

Size: 140 x 38 mm
Material: FR4, 2 mm
Color: black
Turrets: 2 x 15

5,20 €

TTC Headshell Hiwatt Style - BLACK

TT-Cabs Headshell HiWatt Style, just like the original Hiwatt Headshell with white Piping, black mesh and handle with silver endcaps.

Specifications

Size: ca. 635 x 270 x 285 mm
Chassis Cut Out: ca. 475 mm
Tolex: HiWatt black
Hardware: Silver
Keder / Piping: White
Weight: ca. 8 kg
Wood: 18 mm Poplar

435,00 €

Cagenut / Screw Mounting kit M6

Mounting kit for all TT-Chassis which are designed for mounting with cagenuts and 19" housings

1,45 €

TT-DR103 Hiwatt® Style Outputtransformer

HiWatt Style Outputtransformer, Dropin-Replacement

Primary: 1.8 kOhm
Secondary: 4,8 and 16 Ohm
Power: 120 Watt
Made in Europe

119,00 €

Power Jack w/ fuseholder, Snap-in, Schurter

with one fuse holders 5.0 x 20 mm
Housing: polyamide
for snap-on mounting
Double-pole + protective ground 10 A/250 V
single-pole fusing with bridge to the fuse holder at the L terminal
fuse holder terminals for soldering

5,60 €

JJ 250 µF @ 500 V

Type: Cancap
Capacitance: 250 µF
Voltage Rating: 500 V
Tolerance: -10 % / +30 %
Operating Temperature Range: - 25°C / + 70 °C
Dimensions: Ø 35 mm x 88 mm
Termination Style: radial, solder-lugs

12,90 €

Grommet 10 mm

Color: black
Size:
- A: 10 mm
- B: 12 mm
- D: 17,5 mm
- H: 6,8 mm
- h: 2 mm

0,25 €

Socket Noval Belton, Chassis VT9-ST-2

Type: Noval Socket Belton VT9-ST-2
Version: High quality Micalex socket
Chassis mount
Termination Style: solder lugs
for Tube Type: 12AX7, 12AT7, 12AU7, EL84,
EZ81, EL844 etc.

1,95 €

Socket Octal Belton, Chassis VT8

Type: Octal Socket Belton VT8
Version: High quality Micalex socket
Chassis mount
Termination Style: solder lugs
for Tube Type: EL34, E34L, 6L6, 6V6, 6550,
KT66/77/88 etc.

2,35 €

Fuseholder 5x20 mm

Fuseholder, Chassismount, 5x20 mm
IP 40
Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

1,95 €

Capacitor Clamp 35 mm

Capacitor Clamp
d = 35 mm

2,10 €

Toggle Switch APEM 641 H/2 DPST - ON-OFF

Type: Toggle Switch
Version:DPST, ON - OFF
Rating: 15A / 250VAC, 10A / 400VAC
Contact resistance: 10 mΩ max. at 1A 2VDC
Insulation resistance: 1.000 MΩ min. at 500VDC
Dielectric strength: 2.000 Vrms 50 Hz min.
Operating Life: 10.000 cycles at full load
Termination Style: solder lug / quick-connect terminals

7,65 €

Neutrik NMJ4HC-S - 6,3 mm Mono switched

1/4" mono jack, switched, with chrome ferrule and standard solder lugs
Mounting nut included

Wide body and extremely durable contacts
Mates with all mono A-gauge plugs acc. EIA RS-453 standard

1,35 €

Rotary Switch 1 pol / 3 pos - 6 A Impedance / Voltage Selector

High Power Rotary Switch

--,--

Signal lamp, red 230V

Signal lamp square red

Operating voltage: 230 V~
Power: 0,05 W
Light/housing color: red
Connection: soldering lugs
Installation Ø: 10 mm
Installation depth: 35 mm
Overall dimensions (ØxL): 12x42 mm

1,30 €

Faceplate for TT Amp-Kit YAH100

Faceplate for TT Kit YAH100

Color #C01 black/white
Material: 1,5 mm Transply
Front and Rear panel

29,80 €

Needed for:

TT Kit YAH100 - Yet Another Hiwatt

YAH100 - Kit based on the HiWatt DR103

This kit contains all parts for building the TT YAH100 including chassis, faceplate and knobs.
NOT included is a headshell.
More details about the amplifier can be found on the >>Project page.