Main page » Components » Resistors » Carbon Film 1 W » Xicon Carbon Film Resistor 3.9k / 1 Watt

Xicon Carbon Film Resistor 3.9k / 1 Watt

Product No.:: rcf-3k9-1
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: conform
Weight:: 0.001 kg per piece

0,25 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Xicon Carbon Film Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS

Documents

XICON RCF Datasheet (120.63 KB)

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Elektrolyt 22 µF @ 450V

Type: Electrolytic can capacitor
Capacitance: 22 µF
Voltage Rating: 450 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 105 °C
Dimensions: Ø 16 mm x 32 mm
Termination Style: radial
Grid: 7,5

1,95 €

Bulb 6,3 Volt / #47 Base BA9s

for Fender Pilot-Light

BA9s
#47
6,3 V

0,70 €

Knob Chickenhead white

Type: Chickenhead
Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size: 32 x 13,7 mm
Mounting: Set-Screw

0,90 €

Tolex Glue SG5, 500 ml

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.