Kit TT-Midi-Switcher
Kit TT-Midi-Switcher
Kit TT-Midi-Switcher

Kit TT-Midi-Switcher

Product No.:
kit-MidiSw
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.059 kg per piece
21,80 €

incl. tax excl. Shipping costs

Bookmark
Ask Question
Description

Mikrocontroller gesteuerter MIDI-Umschalter für Kanalumschaltung oder Loop. Die Ansteuerung kann entweder über MIDI oder Fußschalter (Taster) erfolgen.

!!! UPDATE !!! Mit dem Update Mai 2019 wurden folgenden Anpassungen an dem Modul durchgeführt:

  • Die große Relais-Platine entfällt und ist nicht mehr Bestandteil des Bausatzes, da in der Zwischenzeit eine Vielzahl unterschiedlicher Relais samt Trägerplatine verfügbar sind, welche eine deutlich flexiblere Anwendung ermöglichen.
  • Die Dokumentation wurde zusammen geführt und steht als PDF Download direkt beim Bausatz zur Verfügung
  • Der Mikrocontroller mit der Firmware ist nicht mehr Bestandteil des Bausatzes sondern muss je nach gewünschter Version zusätzlich zum Bausatz bestellt werden

Durch diese Änderungen war es uns möglich, den Bausatz noch universeller, flexibler und auch kostengünstiger an zu bieten. Weitere Kurzinfos und Software auf der >>TT-Midi-Switcher Projektseite

Im Lieferumfang enthalten:

  • Controller Board
  • Bauteile für 5V OnBoard Spannungsversorgung
  • MIDI-Buchse
  • Treiberbaustein ULN2803A
  • Opto-Koppler für MIDI-IN
  • Quarz, Widerstände und Kondensatoren

Im Lieferumfang NICHT enthalten (Bestellung nach Bedarf!):

  • Relais, Trägerplatinen und Freilaufdioden
  • LEDs und Vorwiderstände
  • Taster und Schalter
  • Kabel und Leitungen
  • Mikrocontroller mit Firmware

Files:

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Recommended products:

Tube-Town EZ-Board Twin Relais PCB
Tube-Town EZ-Board Twin Relais PCB
  • Twin Relais PCB for channel switching etc.
  • Size: 50 x 44,5 mm
1,30 €

Miniature signal relays RY-05W-K, DPDT , 5V
Miniature signal relays RY-05W-K, DPDT , 5V
Miniature Signal Relays
2,45 €

Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
  • 2 - Layer
  • 1,5 mm, black
  • Size: 21 x 35 mm
  • For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
0,40 €

µC for Midi-Kit with Looper Programm V 2.X
µC for Midi-Kit with Looper Programm V 2.X
µC loaded with "Looper" programm for the Midi-Kit.
This controller is needed if you want to use the Midi-Kit as Looper.
All outputs can be turned on and off independently.
Firmwareversion 2.x Please see the -> MIDI-Switcher project page for more information.
6,90 €

µC for Midi-Kit with Midi-Switcher Programm V2.X
µC for Midi-Kit with Midi-Switcher Programm V2.X
µC loaded with standard MIDI-Switcher programm for the MIDI-Switcher-Kit.

Firmare Version 2.X
MIDI-Switch can handle Controll Change
6,80 €

Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
  • Single Relais PCB for channel switching etc..
  • Size: 41 x 35 mm
  • For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
1,10 €

Tube-Town EZ-Board MINI Single Relais, PCB
Tube-Town EZ-Board MINI Single Relais, PCB
  • Single Relais PCB for channel switching etc.
  • Size: 31,75 x 28,5 mm
  • For the use with Fujitsu Relais FTR-B3CA4.5Z  (or relais with similar pin layout).
0,90 €

Tube-Town EZ-Board MAXI Single Relais, PCB
Tube-Town EZ-Board MAXI Single Relais, PCB
  • Double Relais PCB MAXI
  • Size: 54 x 45  mm
  • For the use with two Finder Relais 43.41.7  (or relais with similar pin layout).
1,85 €

Customers who bought this product bought also the following products:

Tolex Marshall-Style Snakeskin / Schlange
Tolex Marshall-Style Snakeskin / Schlange

Width ca. 135 cm
Price per linear meter.
Actual shades may vary.
We ship the tolex as one piece if you order more than 1 meter.

23,80 €
17,63 € per m²

Tolex Glue SG5, 500 ml
Tolex Glue SG5, 500 ml

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

11,95 €
23,90 € per Liter

µC for Midi-Kit with Midi-Switcher Programm V2.X
µC for Midi-Kit with Midi-Switcher Programm V2.X
µC loaded with standard MIDI-Switcher programm for the MIDI-Switcher-Kit.

Firmare Version 2.X
MIDI-Switch can handle Controll Change
6,80 €

Finder Relays DPDT , 125V 2A, 12V
Finder Relays DPDT , 125V 2A, 12V

Relays, type Finder Dual-In-Line-Relais 2,0 A for low breaking capacity.

  • Compact dimensions: 20.3 x 10.1 x 11.4 mm, grid according to wiring diagram
  • Function: 2 x changeover contacts
  • Constant/inrush current: 3.0 A/2.0 A
  • Rated/switching voltage: 125 VAC/250 VAC
  • Breaking capacity AC 1/AC 15 (230 V): 125 VA/25 VA
  • Switching current DC 1:    2.0 A/30 V, 0.3 A/110 V
  • Minimum switching load: 10 mW (0.1 V/1.0 mA)
2,55 €

Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
Tube-Town EZ-Board Single Relais PCB
  • 2 - Layer
  • 1,5 mm, black
  • Size: 21 x 35 mm
  • For the use with Finder Relais type 30.22.9xx  (or relais with similar pin layout).
0,40 €

Custom Shop Faceplate PRO REVERSE - GLOSSY
Custom Shop Faceplate PRO REVERSE - GLOSSY

Custom Shop Faceplate, Acryl reverse, laser engraved, 1,5 mm, different sizes, glossy. The engraved surface becomes transparent and must then be filled with paint.

This is a Custom-Shop Product. For configuration and order please scroll down the page.

21,35 €

Fuse 0.315 A slow blow, Pack of 10
Fuse 0.315 A slow blow, Pack of 10
  • Rated Voltage: 250 VAC
  • Contact caps: nickel-plated brass
  • Size: Ø 5 mm x 20 mm
  • Pack of 10
1,55 €

F+T 100 µF @ 100 Volt, axial
F+T 100 µF @ 100 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 100 µF
  • Voltage Rating: 100 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 10 mm x 30 mm
  • Termination Style: axial
2,75 €

F+T 100 µF @ 350 Volt, axial
F+T 100 µF @ 350 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 100 µF
  • Voltage Rating: 350 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 37 mm
  • Termination Style: axial
3,30 €

F+T 22 µF @ 500 Volt, axial
F+T 22 µF @ 500 Volt, axial
  • Type: Aluminum Electrolytic Capacitors
  • Capacitance: 22 µF
  • Voltage Rating: 500 V
  • Tolerance: +/- 20%
  • Operating Temperature Range: - 40°C / + 85 °C
  • Dimensions: Ø 18 mm x 39 mm
  • Termination Style: axial
2,75 €

Fender Pilot Light Set- red
Fender Pilot Light Set- red

Fender Pilot Light Set- red

  • Chassis Hole: 17,5 mm
  • Threading: 9/16 - 24
  • Jewel red
8,70 €

Fender Chassis-Straps Large
Fender Chassis-Straps Large
  • Mounting hole distance around 128 mm
  • Large Chrome straps
  • length around 5-5/8" (14 cm) end to end
  • mounting screws included
  • For Twin Reverb®, Prosonic™, Vibrosonic, Vibro-King®
15,25 €

Strap-Handle Fender Vintage, black
Strap-Handle Fender Vintage, black
  • Type: Fender   #0990947000
  • Version: Strap Handle
  •   Plastic covered with steel inner core
  • End plates: Steel, nickel plated
  • Color: Black
  • Mounting hardware: Screws and t-nuts included
16,00 €

Piping medium, silver - 3.1 x 8.5 mm - Pack of 4 m
Piping medium, silver - 3.1 x 8.5 mm - Pack of 4 m

PVC piping for baffles and front panels

  • Size 3.1 x 8.5 mm
  • 4 m piece
10,80 €
2,70 € per m

Socket Octal Belton, Chassis VT8
Socket Octal Belton, Chassis VT8
  • Type: Octal Socket Belton VT8
  • Version: High quality Micalex socket
  •   Chassis mount
  • Termination Style: solder lugs
  • for Tube Type: EL34, E34L, 6L6, 6V6, 6550,
  •   KT66/77/88 etc.
2,35 €