RCA Phono socket gold plated with Teflon insulation.
Used on many Custom Shop instruments, this switch allows you
to change your Telecaster's pickup wiring from series to parallel.
This wiring mod offers increased output and a fatter tone with the
flick of a switch, while preserving standard Tele tones
in the other 3 positions.
Fender® Part # 099-2250-000
Mallory Type 150 is a general purpose capacitor for use in blocking, bypass, decoupling, smoothing and some timing applications.
Operating Tempeature Range: –55 ºC to +125 ºC (derate linearly to 50% rated voltage at 125 ºC)
Dielectric Withstand Voltage: .6 x rated voltage for 2 s @ +25 ºC ±5 ºC
Dissipation Factor (DF): tgd x 10–4 at +25 ºC ±5 ºC
Insulation Resistance: 10,000 MO x µF, 30,000 MO Min.
Self Inductance: 1 nH max. per 1 mm lead and body length
Life Test: 1000 hrs @ 85 ºC 1.25 x Vn
Damp Heat Test: 95% RH @ +45 ºC for 21 days
Soldering: 260 ºC ±5 ºC for 10 s ±1 s
Long Term Storage Stability: ?C/C = ±3% after 2 years
For further details please see the datasheet.
LPS = Long Plate Spiral Heater
Sounds pretty good in the input section of "modern" Fender amps with more overdrive but is also very popular among the Marshall users.
Kit for TT PSU Mini
The kit includes all components except a powertransformer and a choke for building PSU for tube amps. If you want to use a choke instead of the 5 W resistor than you must order the choke that you need separately.
The PSU can handle max 700 V DC !! and is recommended for tube amps up to 50 Watt. The size of the PSU is 97 x 55 mm only and has a high of ca. 40 mm.
Please refer the attached schematic for more infos about the layout and design of the PSU.