Chassis Strap Large
Chassis Strap Large
Chassis Strap Large

Chassis Strap Large

Product No.:
hw-csl
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.021 kg per piece
3,35 €

incl. tax excl. Shipping costs

Bookmark
Ask Question
Description
  • Chassis Straps large size
  • Mounting hole distance around 128 mm
  • one piece
Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Recommended products:

Chassis Strap Screw 8-32 x 3 1/4
Chassis Strap Screw 8-32 x 3 1/4
  • Matching srew for the chassis straps.
  • Size: UNC 8-32 x 3-1/4
  • Fender®  Part # 002-2236-049
  • price per screw
1,40 €

Chassis Strap Nut 8-32 x 3 1/4, Set of 10
Chassis Strap Nut 8-32 x 3 1/4, Set of 10
  • Matching nut for the chassis straps screws.
  • Set of 10
  • UNC: 8-32 x 3 1/4
1,10 €

Customers who bought this product bought also the following products:

Xicon Metalfilm Resistor 470k Ohm / 1% / 0,5 W
Xicon Metalfilm Resistor 470k Ohm / 1% / 0,5 W
Xicon Metall Film Resistor
Great for amps and effects, low noise, small size, high power rating
0,20 €

Marshall Style Knob Gold Push-On
Marshall Style Knob Gold Push-On
Marshall Style Knob, Gold
  • Material: Phenolic
  • Shaft Size: 6 mm, knurled
  • Size: 19,5 x 15,3 mm
  • Mounting: Push-On, no D-Shaft
1,09 €

Marshall Style Knob Gold
Marshall Style Knob Gold
Marshall Style Knob, Gold
  • Material: Phenolic
  • Shaft Size: 6 - 6,4 mm
  • Size: 19,5 x 15,3 mm
  • Mounting: Set-Screw, hexagon
1,35 €

Hex Nut for Alpha Potentiometer 24 mm PCB M9 x 0,75
Hex Nut for Alpha Potentiometer 24 mm PCB M9 x 0,75
Hex nut for Alpha Potentiometer series PMA-xxx (Marshall Potentiometer) and similar shafts
  • Size: M9 x 0,75
  • Price per nut
0,10 €

Potentiometer for Marshall JCM800, 220 kOhm linear
Potentiometer for Marshall JCM800, 220 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

Potentiometer for Marshall JCM800, 1 MOhm log
Potentiometer for Marshall JCM800, 1 MOhm log
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

Potentiometer for Marshall JCM800, 22 kOhm linear
Potentiometer for Marshall JCM800, 22 kOhm linear
  • Body: 24 mm
  • Shaft: 6,35 mm, Split shaft
  • PCB
  • for JCM 800, 2205, 2210, etc.
  • incl. one nut and one washer
1,50 €

Silicon Tube Damper for 6V6
Silicon Tube Damper for 6V6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 28 mm
  • Price per damper
BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.
0,65 €

Silicon Tube Damper for 6L6
Silicon Tube Damper for 6L6
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
  • Inner diameter ca. 34 mm
  • Price per damper
0,65 €

Silicon Tube Damper for 12AX7, EL84
Silicon Tube Damper for 12AX7, EL84
Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.
0,45 €

TT-Chassis 008 - Dumble Standard - 490 x 200 x 65
TT-Chassis 008 - Dumble Standard - 490 x 200 x 65
  • Size: 490 x 200 x 65 mm (Dumble size)
  • Material: 2 mm Aluminium
  • Mounting: with cage nuts (not included)
  • reinforced Corners
  • With two cut-outs for power jacks
  • Made in Germany
30,90 €

Toggle Switch Carling 110-63, SPST ON-OFF
Toggle Switch Carling 110-63, SPST ON-OFF
  • Type:Toggle Switch
  • Version:SPST, ON-OFF
  • Rating: 3A / 250V, 6A / 125V
  • Insulation resistance: 100MΩ min.
  • Dielectric strength: 1000V min.
  • Operating Life: 25.000 cycles
  • Drill Ø: 12 mm
  • Termination Style: solder-lugs
5,80 €

Knob Chickenhead red
Knob Chickenhead red
  • Type: Chickenhead
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: 32 x 13,7 mm
  • Mounting: Set-Screw
0,90 €

Knob Synth Pointer cream
Knob Synth Pointer cream
  • Type: Synth Pointer
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: d=16 mm, h = 11,8 mm
  • Mounting: Set Screw, Brass Insert
0,80 €

Knob Synth Pointer black
Knob Synth Pointer black
  • Type: Synth Pointer
  • Material: Phenolic
  • Shaft Size: 6 - 6,3 mm
  • Size: d=16 mm, h = 11,8 mm
  • Mounting: Set Screw, Brass Insert
0,80 €