Main page » Tubes » JJ-Electronic » JJ 6V6 Red Labe - QUAD

JJ 6V6 Red Labe - QUAD

Product No.:: jj6v6-quad
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: Quad
RoHs:: conform
Weight:: 0.208 kg per Quad

92,80 €
23,20 € per Piece

incl. tax excl. Shipping costs

Quad:

Bookmark

Ask Question

Description

4 tubes, matched as quad

The 6V6 S is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end. Known to be a very powerful 6V6 due to its robust construction. In general, a very balanced tone. It can be used also in some 6L6 amplifiers.

Files:

Datasheet

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

JJ EL84 #05 - Fender Blues Junior

JJ EL84 #05 - Soft Plus

Not so hot than the #06 selection but still nice punch
Recommended for Fender Blues Junior and Pro Junior and similar amps.
Price for one tube.

FAQ: If I order two or more of these tubes, are they all "the same"?
Yes, the tubes are all "matched" and selected for the in the description mentioned amplifier.
FAQ: Can I replace the tubes myself or are adjustments needed?
Adjustments are not possible on the listed amplifier (unless a bias potentiometer has been added afterwards). The replacement can therefore be done without adjustments.

18,00 €

Resistor Metaloxide 2 Watts / 10 kOhms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,20 €

Rean NYS224C-0, 6,3 mm Jack plug mono

Rean ( by Neutrik) ¼" plug

mono
diecast
handle with rubber flex relief

1,35 €

JJ 12AY7 / 6072

Remake of a 12AY7 / 6072. Smooth sound, great for fender-like amps.

17,95 €

JJ 5Y3

JJ5Y3S rectifier tube with directly heated cathode. Robust and durable.

21,40 €

Cliff 6,3 Mono Switched Jack

Vintage style. Made in England. 4 solder lugs, Marshall replacement

1,35 €

Switchcraft 228, Jack plug mono, angled, silver

Angled, ¼" plug (6.3 mm), 2-pin male

8,89 €

Toggle Switch Carling 110-63, SPST ON-OFF

Type:Toggle Switch
Version:SPST, ON-OFF
Rating: 3A / 250V, 6A / 125V
Insulation resistance: 100MΩ min.
Dielectric strength: 1000V min.
Operating Life: 25.000 cycles
Drill Ø: 12 mm
Termination Style: solder-lugs

5,80 €

Knob Fender Style Vintage, cream

Knob Fender Style Vintage

Material: Phenolic
Shaft Size: 6 - 6,3 mm
Size: 20,3 x 11,8 mm
Mounting: Set-Screw with Bras insert

1,50 €

Hammond 290CAX for Fender Universal 125P1B / 022772

This is the universal version of the 290AEX
Powertransformer for Champ, Vibro Champ, Princeton, Princeton Reverb, Tweed Deluxe
Fender Part Number 125P1B and 022772
Pri: Dual Voltage 120 or 240 V 50/60 Hz
Sec: 630 VAC or 550 VAC

93,60 €

Fuseholder 5 x 20 mm, black

Rated voltage: 250 VAC
Rated current: 10 A (VDE), 16 A (UL/CSA)

0,75 €

Xicon Carbon Film Resistor 220k / 1 Watt, Pack of 5

Xicon Carbon Film Resistor
Low noise, small size, high power rating
Power: 1 Watt
Voltag: 500 V working / 1000 V overload
Axial Leads
-55° C - 155° C
12 * 5 mm
RoHS