Rubber foot with steel insert 38 x 10 mm

• Size: 510 x 220 x 210 mm (Außen/Outside)
• Chassis-Cutout: 410 x 55 mm
• Weight: ca. 6 kg
• Wood: 12 mm Birch Plywood

• Cabinet corner with cutaway
• 2 leg - 1 mm Steel, nickel plated.
• Fixing holes: 4.2. mm
• Internal radius: 12 mm

• Rubber foot with steel insert
• Size: d = 38 mm, h = 25 mm

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

• Texture and color like the original Marshall Bluesbreaker 1974x Weaves, same manufacturer
• Size (W x L): ca. 80 x 100 cm (only available in this size)
• Material: 100% treated paper
• Price per pcs.
• Actual shades may vary.

• Plastic covered with steel inner core
• End plates gold plated
• Color: Black
• Mounting hardware screws and t-nuts included

• Mesh Gold
• Size: 660 x 150 mm
• Net Weight: ca. 150 g (Gross weight: 350 g)

Metaloxide film resistor

• Nominal Power: 1 Watt
• Max. cont. Working Voltage:: 500 V RMS
• Tolerance: +/- 1%
• Temperature range: -55° C...200° C
• Ultra Small Size
• Size: 6,3 x 2,4 mm
• Flame retardant

• Size 5 x 14 mm
• 4 m piece

• Plastic covered with steel inner core
• Steel, black plated end plates
• Black
• Screws and t-nuts included

Hardwareset:
8 X Cabinet corner w/ cutaway 2 leg, silver (ah4023b)
16 X Screws with extra flat head, black
Internal radius: 12 mm