Main page » Tubes » Preamptubes » 12AX7 / ECC83 / 5751 » Silicon Tube Damper for 12AX7, EL84

Silicon Tube Damper for 12AX7, EL84

Product No.:: tt-da05
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
Weight:: 0.002 kg per piece

0,45 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Inner diameter ca. 22 mm
Can not be used with JJ 12AX7 and other JJ preamp tubes with similar diameter and JJ EL84 and JJ EL844
Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Needed for:

EH 7025 (12AX7 / ECC83 HQ)

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

21,80 €

EH 7025 (12AX7 / ECC83 HQ) - V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

27,80 €

Tung-Sol 5751

Premium medium-Mu Twin Triode for use in preamplifier.

29,95 €

EH 7025 (12AX7 / ECC83 HQ) - Balanced

TT Selection: Balanced
Both systems with balanced gain

27,80 €

Customers who bought this product bought also the following products:

Tung-Sol 5751

Premium medium-Mu Twin Triode for use in preamplifier.

29,95 €

Sylvania 5814A / 12AU7 USA NOS

Sylvania 5814A, NOS, Boxed
Made in USA

33,91 €

Sylvania 12AT7 / ECC81 NOS

Sylvania 12AT7, NOS

Made in USA
Limited Stock
Well balanced sound with lots of details

19,85 €

JJ ECC832 / 12DW7

COMBINATED DOUBLE TRIODE
ECC832 is 12DW7 pre-amplifying double triode. It combines 12AX7 and 12AU7, where the 12AX7 is used as 1st stage and the 12AU7 as 2nd stage.

19,90 €

Tung-Sol 12AX7 / ECC83 Reissue V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound.

28,50 €

GE 5814A / 12AU7 NOS JAN USA

GE 5814A / 12AU7 NOS

Limited Stock
Made in USA
JAN

22,95 €

RCA 12AU7 / ECC82 NOS

RCA 12AU7 / ECC82

Made in USA
NOS
Black Plate
Limited stock
Original Packing

34,90 €

Kit Double Relais Switcher, 6 V

Double Relay Switcher for channel switching and similar applications.

9,70 €

EH 12AX7 / ECC83 V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

The 12AX7EH provides high gain with ultra low noise and detailed, musical tone that rivals the most desirable NOS types.

28,20 €

JJ EL84 / 6BQ5 Red Label - PAIR

2 tubes, matched as pair

JJ EL84 / 6BQ5 Red Label

33,50 €
16,75 € per Piece

JJ EL34 Version II - PAIR

2 tubes, matched as pair

EL34 II has fuller low mids and low end but does not lose headroom in the high end. Stronger than regular JJ EL34 but not as aggressive as the JJ E34L.

48,00 €
24,00 € per Piece

Belton Octal Socket VT8-PT, long leads

Belton Octal Socket
PC mount
long leads

2,45 €

TT kit DC Heater

Tube-Town kit for DC Heater, for schematic check product pictures
Size PCB: 74,5 mm x 34,3 mm
The kit includes all parts needed for the complete build

8,40 €

JJ 12AX7 / ECC83S Balanced

TT Selection: Balanced
Both systems with balanced gain

Sweet and warm sounding preamp tube with high gain.

21,90 €

JJ 6V6 Red Label - SINGLE

Single tube, not matched

The 6V6 S is a beam power pentode with octal base and a maximum plate dissipation of 14W. It has fat low end and full mid tones with very good tone separation and a smooth, clean high end. Known to be a very powerful 6V6 due to its robust construction. In general, a very balanced tone. It can be used also in some 6L6 amplifiers.

23,20 €