Main page » Tubes » Powertubes » 6V6 » Silicon Tube Damper for 6V6

Silicon Tube Damper for 6V6

Product No.:: tt-da15
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
Weight:: 0.003 kg per piece

0,65 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Vacuum Tube Damper made of silicon, helps to reduce noise and rattle of vacuum tubes. But it will not turn a bad tube into a good tube.
If a higher level of damping is needed, than use more than one damper per tube.

Inner diameter ca. 28 mm
Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Customers who bought this product bought also the following products:

Teslanol Contact spray T6, 200 ml

Does not influence any frequencies in the VHF/UHF range. Quickly eliminates contact resistances, impregnates against moisture and soiling. Particularly yielding agent with micro sliding film that preserves the contacts and prolongs their functionality.

5,30 €

Toroidal 27VA Preamp / Engl 520

Powertransformer for preamps, same specs as the Engl 520 Powertransformers
Pri: 230 V (gelb / yellow)
Sec 1: 25V @ 0,1 A (grün / green )
Sec 2: 10V @ 0,9 A (blau / blue)
Sec 3: 240 V @ 0,03 A (rot / red)
Sec 4: 6,4 V @ 1,3 A (schwarz / black)

57,00 €

Psvane 12AT7 / ECC81 - S-Art Series

Psvane S-Art High-End Series 12AT7 / ECC81

Gold Logo
Goldpins
Dropin replacement for all 12AT7 and ECC81 tubes
Price per tube

48,80 €

EH 12AT7 / ECC81 Gold

Large Plate 12AT7 / ECC81
Gold-Pins

31,90 €

Lock Washer M4, 100 pcs

Type: Lock Washer
Material: Steel
Surface: Zinc-plated
DIN: 6797
Price: Pack with 100 pcs.

1,77 €
0,02 € per Piece

Washer M5, 100 pcs

Type: Washer
Material: Steel
Surface: Zinc-plated
DIN: 125
ISO: 7089
Price: Pack with 100 pcs.

1,50 €
0,02 € per Piece

T-Nut M4, 8 pcs.

T-Nut M4
Pack with 8 pcs.

1,10 €
0,14 € per Piece

Washer M4, 100 pcs

Type: Washer
Material: Steel
Surface: Zinc-plated
DIN: 125
ISO: 7089
Price: Pack with 100 pcs.

1,60 €
0,02 € per Piece

Socket Head Screw, black M5 x 30

Socket Head Screw, hexagon socket
Material: Steel
Strength class: 8.8
Surface: black
DIN: 912
ISO: 4762

0,25 €

Wiring Harness, mono, speaker crimps

Wiring Harness, mono, speaker crimps
Wire: 2 x 1,5 mm² red - black
Speaker Crimps on both sides
Length: ca. 55 cm

4,90 €

Wiring Harness, mono, for Loudspeakers / 2

Wire Set for internal speaker connection
Number of speakers: 2
Type: Mono, parallel and serial
Wire: 2 x 1,5 mm² red - black
Jack socket / speaker crimps
Length: ca. 2 * 55 cm

16,80 €

T-Nut M5, 8 pcs.

T-Nut M5
Pack with 8 pcs.

0,90 €
0,11 € per Piece

Kit Seriell Patchbox

Kit Serielle Patch-Box

Everybody knows the problem: two speaker cabs but only one output - what do do ?
Use the TT Seriell Patchbox and you can connect two speaker-cabs in serial with your amp.

10,40 €

Compound socket M5/10*12mm

Coupling Sleeve

Bare steel. Connection can be separated as often as desired.
Fast screwing into holes with hand, electric and pneumatic tools.
Sharp self - cutting outside thread. Inside thread M5.

Application: Wood, plastic and other soft materials.

suitable spiral drill bit 9mm, Product No.: rk-208090

0,40 €

Silicon Tube Damper for EL34, KT77

Inner diameter ca. 32 mm
Use tt-da15 for EH EL34
Price per damper

BEFORE ordering check the exact outer diameter of the vacuum tubes and compare it with the diameter of the damper to make sure that the damper fits.

0,65 €