Main page » Components » Parts for Amps » Solder » Solder 1,0 mm² 100 g

Solder 1,0 mm² 100 g

Product No.:: lot-1-100
: In stock for immediate delivery.
Delivery time depends on the destination country*
Stock:: piece
RoHs:: not conform
Weight:: 0.115 kg per piece

7,30 €

incl. tax excl. Shipping costs

piece:

Bookmark

Ask Question

Description

Solder with flux core
Ideal for fine soldering and contact soldering jobs requiring corrosion-resistance and high production working speed.
DIN EN ISO 9453: Sn60Pb39Cu1
DIN EN 61190: Sn60Pb38Cu02
Melting range: 183 to 190 °C
Solder diameter: 1,0 mm²
Spool size: 100 g

Customer reviews

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

Unfortunately there are no review yet. Be the first who rate this product.

Needed for:

Soldering iron 40 W

General purpose soldering iron suitable for a wide range of electrical soldering of circuits, medium-thick wires and cables.

7,40 €

Customers who bought this product bought also the following products:

Cloth Wire AWG #22 (0,32 mm²) braided, blue, 5 m

Cotton Braided Push Back Wire

#22 AWG 7/30 bare soft copper with a tinned overcoat
celanese braid, overall cotton braid, waxed
Packing: 5 m

10,90 €
2,18 € per m

CTS Potentiometer 1 MOhm log / Audio

Type: Panel Mount Potentiometer
Power Rating: 0,5 W
Voltage Rating: 750 V DC
Shaft: 6,10 mm, knurled
Shaft length: 15 mm
Drill Ø: 9,4 mm
Termination: Solder lugs
Dimension: 24 mm

3,20 €

Slide Switch Universal Miniatur, DPDT ON-ON

Type: Slide Switch
Version: DPDT, ON-ON
Dimensions: 23 x 17 x 7,5 mm
Hole spacing: 19,5 mm
Rating: 0,5 A / 50V DC
Termination Style: solder-lugs

0,30 €

Resistor Metaloxide 2 Watts / 820 Ohms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,20 €

Fender Pilot Light Set- red

Chassis Hole: 17,5 mm
Threading: 9/16 - 24
Jewel red

8,70 €

Resistor Metaloxide 2 Watts / 27 kOhms

Resistor Metaloxide 2 Watts

+/- 5% tolerance
-55° C to 240° C operating range
Max 500 V
Excellent flame retardant coating
Different manufacturers

Please note:
These resistors have a very small form factor:
red: l = 10 mm, d = 3.9 mm
green: l = 11.5 mm, d = 4.5 mm

0,25 €

JJ 5751 V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

This tube is recommend to tame the gain of an amp and make it sound "sweeter". The 5751 has only a gain of 70 instead of 100 like the typical 12AX7/ECC83 tube type and can be used as a drop in replacement for 12AX7 / ECC83 tubes.

21,90 €

Bulb 6,3 Volt / #47 Base BA9s

for Fender Pilot-Light

BA9s
#47
6,3 V

0,70 €

F+T 47 µF @ 450 Volt, axial

Type: Aluminum Electrolytic Capacitors
Capacitance: 47 µF
Voltage Rating: 450 V
Tolerance: - 20 % / +20 %
Operating Temperature Range: - 40°C / + 85 °C
Dimensions: Ø 18 mm x 39 mm
Termination Style: axial

2,80 €

JJ EZ81 / 6CA4

EZ81 is 6CA4 Noval base rectifier diode for guitar or HiFi ampliers.

17,50 €

JJ 12AU7 / ECC82

ECC82 / 12AU7 medium gain pre-amplifying double triode.
Provides a very smooth sound with well-defined tones suitable for audio and guitar amplifiers.