TT-Kit JC18
TT-Kit JC18
TT-Kit JC18

TT-Kit JC18

Product No.:
kit-jc18
<font color = green><b>available in short term</b></font></br>Leadtime ca.1 Week* available in short term
Leadtime ca.1 Week* 
RoHs:
conform
Weight:
5 kg per piece
360,00 €

incl. tax excl. Shipping costs

Bookmark
Ask Question
Description
Set of componentes for building the TT JC18 Guitar Amp.
Please visit the >>Project page for more infos about the amp, schematics and layout.

INCLUDED:
  • Powertransformer Tube-Town 18W, 0-120-230-240V @ 50/60 Hz (since 25. Nov. 2019)
  • Outputtransformer Hammond 1750PA
  • Resistors
  • Capacitors
  • Jacks
  • Light
  • Wires
  • Board
  • Switches
  • Tubes
  • Fuses & Fuesholder

NOT INCLUDED:
  • Chassis
  • Knobs
  • Faceplate

To build this project knowledge in electric engeneering, experience with high voltage, and the reading and understanding of schematics and dealing with measurement device is highly recommended .
There is NO step-by-step guide for beginners. The circuit and layout plan includes all relevant information. If you don't understand it then don't build it.
THIS IS NOT A BEGINNERS PROJECT !
Customer reviews (4)

Essential information about customer reviews We do not verify that the published reviews come from such consumers who have actually used or purchased the rated goods or services. All reviews, i.e. positive and negative, are published. No reviews that are unobjective, offensive or unrelated to the product will be published.

  • Yann P., 06/13/2021
    Change C1 for 0,68 uf (220uf tt schematic), for original sound. Super amp, good tone with el84.
  • Daniele G., 12/25/2020
    I love this little amp, I'm waiting for the big brother!
    https://youtu.be/k8qjapDXrxk
    I made a little video with different guitars, I like it with the master not too high, just before 5, above it become to much fat and compressed.     it with the master not too high, just before 5, above it become to much fat and compressed.
    go to post
  • antonio c., 11/03/2020
    Quality kit. Sounds very close to the original design and has perfect volume. Highly reccomended.

Recommended products:

Marshall Style Knob "Silver Jubilee"
Marshall Style Knob "Silver Jubilee"
Knob Marshall Style Silver Jubilee
  • Material: Phenolic
  • Shaft Size: 6 - 6,4 mm
  • Size: 19,5 x 15,3 mm
  • Mounting: Set-Screw, hexagon
1,35 €

Marshall Style Knob Gold
Marshall Style Knob Gold
Marshall Style Knob, Gold
  • Material: Phenolic
  • Shaft Size: 6 - 6,4 mm
  • Size: 19,5 x 15,3 mm
  • Mounting: Set-Screw, hexagon
1,35 €

TTC Headshell JC18 - Black
TTC Headshell JC18 - Black

TT-Cabs Headshell designed for the JC18 amp kit

Specifications

  • Tolex: Marshall-Style black
  • Hardware: black
  • Piping: white
  • Weight: ca. 4,6 kg
  • Wood: 12 mm Birch
289,00 €

Faceplate for TT Amp-Kit JC18 - Gold GLOSSY
Faceplate for TT Amp-Kit JC18 - Gold GLOSSY

Faceplate for TT Amp-Kit JC18

  • Color: #LG10 Gold GLOSSY lacquered
  • Material: 1.5 mm Acyl Revers
  • Front + Rear Panel
34,80 €

TT-Chassis 042 - JC18
TT-Chassis 042 - JC18

TT-Chassis Aluminium - Typ 042

Chassis for the JC18 kit, fits in all of our Standard Smallhead and 18W Headcabs and Combos and of course the JC18 headshell

  • Size : 432 x 170 x 65 mm
  • Material: 2 mm Aluminium
37,85 €

TT kit DC Heater
TT kit DC Heater
  • Tube-Town kit for DC Heater, for schematic check product pictures
  • Size PCB: 74,5 mm x 34,3 mm
  • The kit includes all parts needed for the complete build
8,40 €

Customers who bought this product bought also the following products:

Rubber foot with steel insert 38 x 20 mm
Rubber foot with steel insert 38 x 20 mm
  • Rubber foot with steel insert
  • Size: d = 38 mm, h = 20 mm
0,75 €

Cabinet corner w/ cutaway 2 leg, nickel plated, Premium
Cabinet corner w/ cutaway 2 leg, nickel plated, Premium
  • Cabinet corner with cutaway
  • 2 leg - 1 mm Steel, nickel plated.
  • Premium Quality, glossy
  • Internal radius: 12 mm
  • Used on the TT-Cabs
2,05 €

Dish round / Black Metal Jack Ferrule - Single 1/4
Dish round / Black Metal Jack Ferrule - Single 1/4
Round dish / ferrule for 6.3 mm jack
1,70 €

Tolex Tube-Town Alligator Black
Tolex Tube-Town Alligator Black
  • Width ca. 135 cm
  • Price per linear meter.
  • Actual shades may vary.
  • Oktober 2016 NEW VERSION
39,80 €
29,48 € per m²

Tolex Glue SG5, 500 ml
Tolex Glue SG5, 500 ml

waterbased Tolex-Glue, 500 ml

How To use ?
The glue must be applied onto the wood and the Tolex.
After a dyring time of ca. 30 min the Tolex can be put onto the wood.

And how much glue do you need ?
The can of 500 ml is enough for ca. 2.3 m². This is enough for a TTC212REX and there is still about 100 ml glue left.

Attention
For a better adhesive power it is recommended to put a second layer of glue onto the tolex after the drying time.

11,95 €
23,90 € per Liter

Case Handle Dogbone Style imitation leather, black
Case Handle Dogbone Style imitation leather, black
  • Type: Case Handle imitation leather
  • Version: DogBone Style
  • Mounting fittings: Steel, nickel plated
  • Color: Black
9,50 €

Alpha 500 kOhm linear
Alpha 500 kOhm linear
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
1,30 €

Grillcloth British JTM30 Black + Tan - 80 x 100 cm
Grillcloth British JTM30 Black + Tan - 80 x 100 cm
  • matches original "Marshall JTM30 Black + Tan Grillcloth", same manufacturer
  • Size: ca. 80 x 100 cm (only available in this size)
  • Material: 100% treated paper
  • Price per pcs.
  • Actual shades may vary.
23,50 €
29,38 € per m²

Self tap screw 4.2 X 16 mm silver, 25 pcs.
Self tap screw 4.2 X 16 mm silver, 25 pcs.
  • ideal for the mounting of the corners
  • Pack with 25 pcs.
2,75 €
0,11 € per Piece

Switchcraft 11
Switchcraft 11
  • 6,3 mm jack
  • mono
  • Installation diameter: 10 mm
2,40 €

Marshall Style Knob Gold
Marshall Style Knob Gold
Marshall Style Knob, Gold
  • Material: Phenolic
  • Shaft Size: 6 - 6,4 mm
  • Size: 19,5 x 15,3 mm
  • Mounting: Set-Screw, hexagon
1,35 €

Alpha 250 kOhm linear
Alpha 250 kOhm linear
  • Power Rating: 0,25 W
  • Voltage Rating: 250 V AC
  • Tolerance: 20%
  • Shaft: 6,35 mm, Solid Shaft
1,30 €

Cagenut (wide slot), M6
Cagenut (wide slot), M6
Cagenut for 19" racks or chassis
0,35 €

TT kit DC Heater
TT kit DC Heater
  • Tube-Town kit for DC Heater, for schematic check product pictures
  • Size PCB: 74,5 mm x 34,3 mm
  • The kit includes all parts needed for the complete build
8,40 €

Bias-Probe Octal, KIT
Bias-Probe Octal, KIT

Service your poweramps fast and easy: a simple bias-probe for use with any voltage-meter!

15,10 €