Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Preview: Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Preview: Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Mobile Preview: Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
Mobile Preview: Tube-Town EZ-Board 60 x 300 FR4 2 mm, black
-20%

Tube-Town EZ-Board 60 x 300 FR4 2 mm, black

Product No.:
tbez-080
<font color=green><b>In stock for immediate delivery.</b></font> </br>Delivery time depends on the destination country* In stock for immediate delivery.
Delivery time depends on the destination country* 
RoHs:
conform
Weight:
0.071 kg per piece
Offer valid until: 29.02.2024"
RRP6,90 €
Only5,52 €

incl. 19% tax excl. Shipping costs

Recommended products:

Needed for:

Customers who bought this product bought also the following products:

EH 7025  (12AX7 / ECC83 HQ) -  V1

TT Selection: V1 - Low Noise
This tube is selected for sensitive input stages (V1)

Electro-Harmonix has released a low noise, low microphonic version of the 12AX7 that meets all specifications required for the tube to be designated 7025. The original 7025 tube was a 12AX7 that was tested and selected for the lowest noise and microphonics for use in the critical first preamp stages of amplifiers where noise and microphonics could be an issue. In order to ensure that the 7025 specification is consistently met, Electro-Harmonix has redesigned the structure of the 12AX7 and has implemented construction techniques to ensure the absolute lowest noise and microphonics possible. In all samples tested, noise and microphonics could not be detected.

The Electro-Harmonix 7025EH has a mid-range that gives clarity and definition to the sound and a smooth top end for warmth and balance. With these characteristics, along with the exceptionally low noise and low microphonics, the Electro-Harmonix 7025EH will work equally well in vintage and modern high-gain guitar amplifiers, as well as sensitive phono preamps.

27,80 €

EH 6BM8 / ECL82

Triode-pentode used in low power hi-fi amplifiers.

31,50 €

Cloth Wire AWG #22 (0,32 mm²) solid, white, 5 m
Solid copper wire with modern insulation and lacquered cotton braid finish
  • Cross-Section: AWG #22 / 0,32 mm²
  • Outer Diameter: 0,64 mm
  • Packing: 5 m
5,91 €
1,18 € per m

Cloth Wire AWG #22 (0,32 mm²) solid, blue, 5 m
Solid copper wire with modern insulation and lacquered cotton braid finish
  • Cross-Section: AWG #22 / 0,32 mm²
  • Outer Diameter: 0,64 mm
  • Packing: 5 m
6,20 €
1,24 € per m

Tube-Town Reverb Tank RCA cable, 48" (120 cm)
  • Reverb Tank RCA cable
  • ca. 48" (120 cm)
  • Right-Angle plugs
  • Replaces Fender Reverb-Tank RCA cable
1,95 €

EH 6V6 - PAIR
2 tubes, matched as pair

Rugged and wonderful-sounding Power Beam tetrode that performs flawlessly at up to 475 volts. Great replacement for single-ended amps such as Fender Champ, or high plate voltage amps like the Fender Deluxe Reverb.

• Specially developed cathode coating
• Tri-alloy plate material
• Carefully aligned grid
57,00 €
28,50 € per Piece

Solder 1,0 mm² 100 g
  • Solder with flux core
  • Ideal for fine soldering and contact soldering jobs requiring corrosion-resistance and high production working speed.
  • DIN EN ISO 9453: Sn60Pb39Cu1
  • DIN EN 61190: Sn60Pb38Cu02
  • Melting range: 183 to 190 °C
  • Solder diameter: 1,0 mm²
  • Spool size: 100 g
7,30 €

Washer for Alpha 24mm Potentiometer
Washer for Alpha 24mm Potentiometer, RV24 Serie
0,05 €

Spring Retainer EL84

Spring Retainer EL84 / ELL844 and tubes with a similar size

0,95 €

Resistor Metaloxide 2 Watts / 100 kOhms
Resistor Metaloxide 2 Watts
  • +/- 5% tolerance
  • -55° C to 240° C operating range
  • Max 500 V
  • Excellent flame retardant coating
  • Very small size
  • Different manufacturers, colors might vary
0,20 €

Chassis Strap Medium
  • Chassis Straps medium size
  • Mounting hole distance around 101 mm
2,75 €